658191
39
Zoom out
Zoom in
Previous page
1/142
Next page
38
Figure
Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow and slide one
tube into the other.
F
igure
To store the appliance, use the storage aid on the
underside.
a)Stand the appliance up by the handle.
b)Slide the hook on the floor tool into the storage aid.
E
mptying the dust container
Figure
In order to achieve good vacuuming results, the dust
container should be emptied after every use or, at the
latest, when dust or dirt has visibly collected on the
fluff filter or when dust at one point in the container
has reached the height of the marking.
When emptying the dust container, always check how
dirty the fluff filter is and, if necessary, clean it as
detailed in the "Cleaning the fluff filter" instructions.
Figure
Figure
a)Open the appliance lid by pulling the locking tab.
b)Use the handle to remove the dust container from
the appliance.
Figure
a)Release the filter unit of the dust container by pres-
sing the release button.
b)Take the filter unit out of the dust container and
empty the dust container.
Figure
a)Insert the filter unit into the dust container, making
sure it is correctly seated. The arrow on the filter
cover must point in the direction of the locking tab.
b)Press on the container lid until you hear it click into
place.
c)When reinserting the dust container into the applian-
ce, make sure it is correctly seated. Close the appli-
ance lid until the locking tab clicks into place again.
!
Caution
If you notice any resistance when closing the lid,
check that the filter is complete and that the filter
and dust container are correctly seated.
Filter care
Cleaning the plate filter
Your appliance is equipped with a "Sensor Control"
Function.
Figure + Figure .
This function constantly monitors whether your vacuum
cleaner is reaching its optimum power level. The indica-
tor light lets you know when you need to clean the
plate filter, so that the vacuum cleaner can reach its
optimum power level once more.
15
1
6
17
26
18
19
20
23*21*
V
acuum cleaner with “RotationClean” function
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and flashes, the plate filter must be cleaned. The appli-
a
nce is automatically adjusted back to the lowest
power setting.
Figure
Switch the appliance off in order to clean the plate
filter.
!
C
aution: the filter can only be cleaned if the appli-
ance is switched off.
Open the appliance lid by pulling the locking tab.
To clean the plate filter, turn the knob at least three
turns through 180°.
You can also clean the filter if the suction is becoming
less powerful, even if the indicator has not lit up. We
recommend that you clean the plate filter each time
before emptying the dust container. It must be cleaned
at the latest when the “Sensor Control indicator lights
up.
If the indicator flashes three times in quick succession,
even though the plate filter is clean, this is probably
due to a dirty fluff filter or a blockage. In this case, the
appliance automatically adjusts to the lowest power
setting and the indicator lights up red permanently.
Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
Figure
Vacuum cleaner with “SelfClean” function
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and flashes, the appliance switches off automatically
Filter cleaning is activated and performed by the inte-
grated cleaning motor.
If the appliance cleans three times in quick succession,
this is probably due to a dirty fluff filter or a blockage.
In this case, the appliance automatically adjusts to the
lowest power setting and the indicator lights up red.
Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
Figure
Figure
If required, you can also activate the cleaning procedu-
re manually by pressing the "Clean" filter cleaning but-
ton when the appliance is switched on.
If suction power is reducing, you can also clean the fil-
ter even if the indicator has not lit up. We recommend
that you clean the plate filter each time before empty-
ing the dust container.
2
1*
22*
26
23*
26
24*
*dependent on model
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BGS51262 Relaxx x ProSilence 66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGS51262 Relaxx x ProSilence 66 in the language / languages: All languages as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info