Manual Bosch BGS3310 Relyy-y (page 41 of 142) (All languages)

591353

Zoom out

Zoom in

1/142

Vacuuming

Caution

Floor nozzles are subject to a certain amount of

wear, depending on the type of hard ﬂoors you have

(e.g. rough, rustic tiles). You must therefore check

the underside of the ﬂoor nozzle at regular intervals.

Worn undersides of ﬂoor nozzles may have sharp

edges that can damage sensitive hard ﬂoors, such as

parquet or linoleum. The manufacturer does not ac-

cept any responsibility for damage caused by worn

ﬂoor nozzles.

Fig.

Set the adjustable ﬂoor nozzle:

 Rugs and carpets =>

 Hard ﬂoors/parquet =>

If you are vacuuming up relatively large particles, make

sure that you vacuum them up successively and careful-

ly to ensure that the vacuum channel of the ﬂoor nozzle

does not become blocked.

If necessary, you should raise the nozzle in order to

better vacuum up the dirt particles.

Vacuuming with accessories

Fig.

10*

Attach the nozzles to the suction pipe or handle as re-

quired:

a) Crevice nozzle for vacuuming crevices and corners,

etc.

b) Upholstery nozzle for vacuuming upholstered furni-

ture, curtains, etc.

c) Upholstery nozzle with ﬁxed brush ring for vacu-

uming window frames, cupboards, proﬁles, etc.

After use, reinsert the crevice nozzle and upholstery

nozzle into the accessories holder.

d) Professional crevice nozzle

Extra-long crevice nozzle for cleaning crevices, cor-

ners and narrow spaces, e.g. in a car.

e) Professional upholstery nozzle

For gently and thoroughly cleaning upholstered fur-

niture, curtains, etc.

For cleaning the professional upholstery nozzle, sim-

ply vacuum it using the handle.

f) Hard-ﬂoor nozzle for vacuuming hard ﬂoor coverings

(tiles, parquet ﬂooring, etc.)

Cleaning the hard-ﬂoor nozzle

Fig.

11*

a) Vacuum the nozzle from below to clean it.

b) Use scissors to cut through threads and hairs wound

round the rollers and then vacuum them away.

Drill dust nozzle

Fig.

12*

•

Fasten the drill dust nozzle onto the handle and po-

sition it on the wall so that the drill hole opening on

the nozzle is placed directly over where the hole is

to be drilled.

•

Set the appliance to the lowest power level and then

switch it on.

•

The drill dust nozzle is held in the required position

by suction. Depending on the condition of the wall to

be drilled, you may need to adjust to a higher power

setting to ensure that the drill dust nozzle remains

in place.

During drilling, the ﬁne dust is automatically vacu-

umed up.

Turbo brush

If your appliance is equipped with a turbo brush, refer

to the accompanying instruction manual for instruc-

tions on its use and maintenance.

Fig.

You can use the parking aid on the back of the vacuum

cleaner if you want to stop vacuuming for a short time.

•

After switching off the appliance, slide the hook on

the ﬂoor nozzle into the parking aid.

Fig.

When vacuuming stairs, the appliance must be positi-

oned at the bottom of the stairs. If it does not reach

far enough, the appliance can also be carried using the

carrying handle or the handle on the dust container.

After vacuuming

Fig.

•

Switch off the appliance.

•

Remove the main plug.

•

Brieﬂy pull on the power cord and then let go.

(The power cord retracts automatically.)

Fig.

16*

•

Unlock the telescopic tube by moving the sliding

switch in the direction of the arrow, and slide one

tube into the other.

Fig.

To store the appliance, use the storage aid on the un-

derside.

a) Prop up the appliance with the hose or dust contai-

ner handle.

b) Slide the hook on the ﬂoor nozzle into the storage

aid.

Disassembly

Fig.

•

To remove the ﬂexible hose, press the two catches

together and pull out the hose from the appliance's

suction opening.

* Dependent on model

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGS3310 Relyy-y in the language / languages: All languages as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BGS3310 Relyy-y Manual

Product: