Care
Always switch off the vacuum cleaner and disconnect the
power cord from the mains before cleaning the vacuum
cleaner.
The vacuum cleaner and plastic accessories can be cleaned
with a commercial plastic cleaner.
!
Do not use a scourer, glass-cleaning agent or all-
purpose cleaning product.
Never immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be cleaned with a
second vacuum cleaner or simply wiped with a dry cloth or
dusting brush.
Subject to technical modifications.
Replacing the HEPA filter (motor protection filter)
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
Figure
Ⅲ
Open the dust bag compartment lid.
Ⅲ
Pull out the HEPA filter in the direction of the arrow and
remove it from the appliance.
Ⅲ
Insert the new HEPA filter and close the dust bag
compartment lid.
Replacing the exhaust filter
You must replace the exhaust filter in your vacuum cleaner
once a year.
Replacing the micro-hygiene filter
Figure
Ⅲ
Open the dust bag compartment lid (see Figure 18).
Ⅲ
Release the filter holder by pressing the locking tab in the
direction of the arrow
Ⅲ
Remove the foam filter and micro-hygiene filter.
Insert the new micro-hygiene filter and foam filter into the
filter holder.
Ⅲ
Insert the filter holder into the vacuum cleaner and clip
into place.
Replacing the HEPA filter
You can order a new filter from our after-sales service
using the following replacement part number: 574 020
Figure
Ⅲ Open the dust bag compartment lid (see Figure 18).
Ⅲ Release the HEPA filter by pressing the locking tab in the
direction of the arrow and remove it from the vacuum
cleaner (see Figure 23).
Ⅲ Insert the new HEPA filter and clip into place.
If you have used the vacuum cleaner for fine dust parti-
cles (such as plaster or cement), clean the motor pro-
tection filter by tapping it and, if necessary, replace the
motor protection filter and the exhaust filter.
24*
23*
22*
40
en
*
Dependent on model
