Manual Bosch BGC41LSIL (page 50 of 126) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

773121

Zoom out

Zoom in

1/126

50 * Dependent on model

e) Put the lid back on the dust container so that it

clicks into place.

f) Insert the dust container into the appliance.

Maintaining the dust-collection system

Figure 24*

Your appliance is equipped with a SmartSensor Con-

trol indicator. This function constantly monitors whe-

ther your vacuum cleaner is working at its optimum

power level.

The indicator lights up blue when the appliance is wor-

king optimally. If the indicator turns red and ﬂashes,

the plate ﬁlter needs to be cleaned. The appliance is

automatically adjusted back to the lowest power set-

ting.

Cleaning the ﬁlter in the dust container

Switch off the appliance.

Figure 25

Remove the dust container from the appliance. Figure

a) Open the bottom plate of the dust container by

pulling on the lower catch.

b) Fold out the ﬁlter cartridge with ﬁlter foam.

c) Remove the ﬁlter foam from the bottom plate of the

dust container.

d) Tapping out the ﬁlter foam is all that is required to be

able to stop the suction process.

e) Then clean the ﬁlter foam under running water.

f) Alternatively, the ﬁlter can be cleaned in a wa-

shing machine at max. 30 °C using a gent-

le programme and the lowest spin speed.

TIP: To protect the ﬁlter, place it in a laundry bag.

g) Allow the ﬁlter foam to dry completely for at least 24

hours and then place both ﬁlters back in the bottom

plate of the dust container.

h) Close and lock the bottom plate.

i) Insert the dust container into the appliance.

Maintaining the exhaust ﬁlter

The exhaust ﬁlter is designed so that it does not need

to be replaced, provided the appliance is used as inten-

ded in the household.

To ensure that the vacuum cleaner is working at its op-

timum power level, the exhaust ﬁlter should be washed

after one year. The ﬁltering action of the ﬁlter remains

intact, even if the ﬁlter surface becomes discoloured.

Figure 26*

a) Open the rear ﬂap by pressing on the release button.

b) Pull the locking tab in the direction of the arrow to

release the (H)EPA ﬁlter and remove it from the ap-

pliance.

c) Remove the ﬁlter foam from the rear ﬂap.

d) Tap out the ﬁlter unit and ﬁlter foam and rinse them

under running water.

Alternatively, the unit can be cleaned in a wa-

shing machine at max. 30 °C using a gent-

le programme and the lowest spin speed.

TIP: To protect other laundry items, put the ﬁlter unit

into a laundry bag.

e) Once the (H)EPA* ﬁlter has dried completely (at

least 24 hours), insert it back into the appliance and

lock it in place.

f) Insert the ﬁlter foam and close the rear ﬂap.

After vacuuming ﬁne dust particles (e.g. gypsum, ce-

ment, etc.), clean the motor protection ﬁlter by tapping

it out or, if necessary, replace the motor protection ﬁl-

ter and exhaust ﬁlter.

Cleaning instructions

Always switch off the vacuum cleaner and unplug the

mains plug before cleaning the vacuum cleaner. The va-

cuum cleaner and plastic accessories can be cleaned

with standard plastic cleaner.

! Attention:

Do not use abrasive cleaning products, glass clea-

ner or multi-purpose cleaning products. Never im-

merse the vacuum cleaner in water.

Subject to technical modiﬁcations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGC41LSIL in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BGC41LSIL Manual

Product: