779336
24
Zoom out
Zoom in
Previous page
1/50
Next page
22
Prière d'ouvrir les pages portant les illustrations
Mise en service
Figure 1
a) Assembler la brosse turbo et le tube d'aspiration.
b) Enfoncer le tube télescopique sur l'embout de la brosse
turbo jusqu'à ce qu'il s'enclenche.
Pour les séparer, appuyer sur le manchon de
déverrouillage et retirer le tube télescopique.
(Le cas échéant, selon équipement).
Aspiration et brossage simultanés
!Attention
Pour l'aspiration et le brossage simultanés, utiliser toute
la puissance d'aspiration, donc régler la puissance
maximale de l'aspirateur.
Figure 2
Si la brosse turbo aspire trop fort, c'est-à-dire si la force
de poussée est trop élevée, vous pouvez la modifier en
positionnant le régulateur de puissance d'aspiration.
Vous obtiendrez ainsi un effet nettoyant optimal pour les
différents revêtements de sol.
=> tapis à poils longs
=> tapis à poils courts
Figure 3
Brosser les franges uniquement dans le sens de la
flèche.
Attention !
Les brosses pour sols sont soumises à une certaine
usure en fonction de la nature de votre sol dur (p.ex.
carrelages rustiques, rugueux). C'est pourquoi, vous
devez vérifier régulièrement la semelle de la brosse.
Des semelles de brosse usées, à arêtes coupantes,
peuvent occasionner des dommages sur des sols durs
fragiles tels que parquets ou linoléum. Le fabricant
décline toute responsabilité pour d'éventuels
dommages résultant d'une brosse pour sols usée.
fr
Please fold out the picture page!
Starting up
Illustration 1
a) Fit the turbo brush onto the suction pipe.
b) Push the telescopic pipe into the supports of the turbo
brush until it audibly engages. Press the unlocking
sleeve and pull out the telescopic pipe to remove it.
(Equipment will vary with each model).
Vacuuming with the brush
!Please observe!
Only vacuum using the brush on full suction power, i.e.
max. performance of the vacuum cleaner.
Illustration 2
If the turbo brush is vacuuming too strongly, i.e. the slide
force is too high, you can change the slide force by
setting the suction power position, thus enabling an
optimum cleaning effect for the different floor coverings.
=> long pile carpets
=> short pile carpets
Illustration 3
Only brush the fringes in the direction of the arrow.
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Maintenance
Always switch off the vacuum cleaner and pull out the plug
before performing any maintenance work. Remove the
turbo brush from the suction / telescopic pipe.
Illustration 4
Cut off any wrapped around hair or threads using a pair
of scissors.
Illustration 5
Then vacuum up the threads and hair using the corner
nozzle.
Subject to technical change without notice.
en
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BGC21X350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGC21X350 in the language / languages: All languages as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info