Manual Bosch BGB6PET2 (page 26 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

765585

Zoom out

Zoom in

1/64

Description of the appliance

1 Nozzle holder with accessory connection*

2 Nozzle holder without accessory connection*

3 Carpet button*

4 SelfClean button

5 Inspection window with turbine system

6 Brush roller release button

7 Brush roller guide rod

8 Brush roller

Starting up for the ﬁrst time

Fig. 1*

a) Nozzle without accessory connection:

Place the Turbo brush on the suction pipe. To re-

lease the connection, turn the pipe slightly and pull

it out of the Turbo brush holder.

b) Nozzle with accessory connection:

Slide the telescopic pipe until it clicks into place

in the holder for the Turbo brush. To release the

connection, push the release collar and pull out the

telescopic pipe.

Vacuum brushing

! Please note:

Only vacuum brush at full suction power, i.e. max.

power setting on the vacuum cleaner.

Cleaning carpets/carpeted ﬂoors

When cleaning carpets, the brush roller starts auto-

matically three seconds after the vacuum cleaner is

switched on.

When cleaning carpets, the turbine system works wi-

thout any braking. This creates the maximum suction

power for the nozzle.

Cleaning hard ﬂoors

The turbine system detects the type of ﬂooring. When

changing from carpeted ﬂoors to hard ﬂoor, the tur-

bine system starts to brake down the rotation speed

and therefore reduces the noise level.

If you change ﬂooring from hard ﬂoor to carpet the

turbine system doesn’t brake anymore and have again

the maximum suction power.

Fig 2* Carpet button*

Press the Carpet button when vacuuming long-pile

carpets.

This reduce a force of pushing nozzle and speed up

brush roller.

! Please note:

The Carpet button can be pressed when cleaning

all types of ﬂooring.

Fig. 3 SelfClean button

Press and hold the SeﬂClean button when nozzle

is on the hard ﬂoor to order to use the maximum

airﬂow and the minimum resistance for the brush

roller.

The best results of cleaning brush roller are with

using function 3 times per 5 seconds. If it necessa-

ry please hold the button longer

! Please note:

We recommend using the SelfClean function after

using the Turbo brush.

Maintenance

Before carrying out any maintenance work, switch

off the vacuum cleaner and pull out the mains plug.

Remove the Turbo brush from the suction/telescopic

pipe.

Fig. 4

Use the release button to release the brush roller

and pull it sideways out of the Turbo brush.

Fig. 5

 Remove the dirt.

When hairs gets stuck between the brush roller re-

lease button and the brush roller you can separate

them by pulling on the release button with some

force. Then you can clean the axis and put the parts

back together.

Fig. 6

 Push the brush roller in sideways along the guide

rod and into the Turbo brush, and lock it in place

using the release button.

! Caution:

The Turbo brush must only be used with the brush

roller ﬁtted.

Subject to technical modiﬁcations.

*depending on model

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BGB6PET2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BGB6PET2 Manual

Product: