773190
15
Zoom out
Zoom in
Previous page
1/28
Next page
Troubleshooting en
15
11.6 Cleaning the door panels
ATTENTION!
Incorrect cleaning may damage the door panes.
Do not use a glass scraper.
1. Read the information on cleaning products.
→Page14
2. Clean the door panels with a soft dish cloth and
glass cleaner.
Note:Shadows on the door panels, which look like
streaks, are caused by reflections made by the in-
terior lighting.
3. Dry with a soft cloth.
11.7 Cleaning the door seal
ATTENTION!
Incorrect cleaning may damage the door seal.
Do not use metal scrapers or glass scrapers for
cleaning.
Do not use abrasive cleaning agents.
1. Read the information on cleaning products.
→Page14
2. Clean the door seal with hot soapy water and a soft
dish cloth.
3. Dry with a soft cloth.
11.8 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
Setting the cleaning aid
1. Add a few drops of washing-up liquid to a cup of
water.
2. Place a spoon in the cup to prevent delayed boiling.
3. Place the cup in the centre of the cooking compart-
ment.
4. Set the microwave output to 600W.
5. Set the cooking time to 5minutes.
6. Start the microwave.
7. Once the cooking time has elapsed, leave the doors
closed for an additional threeminutes.
8. Wipe out the cooking compartment with a soft cloth.
9. Leave the cooking compartment to dry with the door
open.
12  Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
12.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
Malfunction
1. Switch off the fuse in the fuse box.
2. Switch the fuse back on after approx. 10seconds.
aIf the fault was a one-off, the message disappears.
3. If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page17
Appliance does not
start.
Appliance door not fully closed.
Close appliance door.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BF.634G.1I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BF.634G.1I in the language / languages: English as an attachment in your email.

The manual is 3.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info