Manual Bosch BDU250P CX Performance Line (page 11 of 73) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

780223

Zoom out

Zoom in

1/73

cific solutions are possible whereby there is no access to

the battery On/Off button; see the battery operating in-

structions).

Note: The eBike system always starts in OFF mode for drive

units with a maximum speed of more than 25km/h.

The drive is activated as soon as you start pedalling (except

for in the push assistance function, (see "Switching the push

assistance on/off", pageEnglish–4)). The motor output

depends on which assistance level is set on the on-board

computer.

As soon as you stop pedalling when in normal operation, or

as soon as you have reached a speed of 25/45km/h, the

eBike drive unit switches off the assistance. The drive is

automatically re-activated as soon you start pedalling again

and the speed is below 25/45km/h.

The following options are available for switching off the

eBike system:

– Press the On/Off button of the on-board computer.

– Switch off the eBike battery using its On/Off button (bi-

cycle manufacturer-specific solutions are possible

whereby there is no access to the battery On/Off button;

see the bicycle manufacturer operating instructions).

– Remove the on-board computer from its holder.

If the eBike is not moved for approx. 10 min and no button is

pressed on the on-board computer, the eBike system

switches off automatically in order to save energy.

eShift (optional)

eShift is the integration of electronic gear-shifting systems

into the eBike system. The eShift components are electric-

ally connected to the drive unit by the manufacturer. The

separate operating instructions describe how to operate the

electronic gear-shifting systems.

Setting the assistance level

You can set the level at which the eBike drive assists you

while pedalling on the on-board computer. The assistance

level can be changed at any time, even while cycling.

Note: In some models, the assistance level may be preset

and cannot be changed. There may also be fewer assistance

levels available than stated here.

If the manufacturer has configured the eBike with eMTB

Mode, the assistance level SPORT is replaced by eMTB. In

eMTB Mode, the assistance factor and torque are dynamic-

ally adjusted according to the force you exert on the pedals.

eMTB Mode is only available for Performance Line CX

drives.

The following assistance levels are available as a maximum:

–OFF: Motor assistance is switched off. The eBike can just

be moved by pedalling, as with a normal bicycle. The

push assistance cannot be activated at this assistance

level.

–ECO: Effective assistance with maximum efficiency, for

maximum range

–TOUR: Steady assistance, long range for touring

–SPORT/eMTB:

SPORT: Powerful assistance, for mountain biking and for

cycling in urban traffic

eMTB: Optimum assistance whatever the terrain, rapid

acceleration when starting from a standstill, improved dy-

namics and top performance

–TURBO: Maximum assistance even at high pedalling

speeds, for biking sports

The requested motor output appears on the display of the

on-board computer. The maximum motor output depends on

which assistance level is selected.

Assistance level Assistance factor A)

Active Line Performance Line Performance Line CX

Cruise Speed

ECO 40% 50% 55% 50%

TOUR 100% 120% 120% 120%

SPORT/eMTB 150% 190% 190% 210% to 300%B)

TURBO 250% 275% 275% 300%

A) The assistance factor may vary in some models.

B) Maximum value

English – 3

Bosch eBike Systems 0 275 007 XD2 | (25.04.2018)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BDU250P CX Performance Line in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BDU250P CX Performance Line Manual

Product: