Manual Bosch BCH6L2561 (page 42 of 114) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

773106

Zoom out

Zoom in

1/114

Fig. 14

•Remove any dirt which may have been lodged under-

neath the container ejector opening.

•Insert the ﬁlter unit into the dust container, making

sure it is correctly seated.

•Insert the dust container in the appliance, so that it

'clicks' audibly into place.

! Caution: If you notice any resistance when inserting

the dust container, check that the ﬁlter is complete

and that the ﬁlter unit and dust container are correct-

ly seated.

Filter care

! Caution: The ﬁlter can only be cleaned if the appli-

ance is switched off.

Your appliance is equipped with a "Sensor Control"

function.

This function constantly monitors whether your vacu-

um cleaner is working at its optimum power level. The

indicator light lets you know when you need to clean

the ﬁlter cartridge, so that the appliance can reach its

optimum power level once more.

Fig. 15 Sensor Control

The indicator lights up blue or is off when the appli-

ance is working at its optimum level. Once the indica-

tor turns red and ﬂashes, the outer ﬁlter unit and ﬁlter

cartridge must be cleaned.

The appliance is automatically adjusted to power level

Fig. 16 Cleaning the outer ﬁlter unit

The outer ﬁlter unit should be cleaned at regular in-

tervals in order to ensure optimum operation of the

vacuum cleaner.

•Please switch off the appliance to clean the outer

ﬁlter unit.

•Remove the dust container from the appliance.

Fig. 12

•Take the ﬁlter unit out of the dust container. Fig. 13

•Clean the outer ﬁlter unit.

a) It is usually sufﬁcient to lightly shake or tap out the

whole ﬁlter unit when the dust container is emptied in

order to dislodge any particles of dirt.

b) If this is not sufﬁcient, you can use a dry cloth to remo-

ve dirt particles from the surface.

Fig. 17 Cleaning the ﬁlter cartridge

•Switch off the appliance.

•Remove the dust container from the appliance.

•Fig. 12

•Take the ﬁlter unit out of the dust container. Fig. 13

a) Turn the ﬁlter cartridge lid anti-clockwise and remove

the ﬁlter cartridge from the ﬁlter unit.

b) Firstly, clean the ﬁlter cartridge by tapping out the dirt.

c) Pull out the foam ﬁlter from the motor protection and

rinse separately.

Allow the foam ﬁlter and motor protection ﬁlter to

dry completely (approx. 24 hours)

d) After ﬁtting the foam ﬁlter, insert the ﬁlter cartridge

into the dust container.

e) Insert the ﬁlter cartridge into the ﬁlter unit and lock it

by turning the lid clockwise.

If, after hand-washing the ﬁlter cartridge, the "Sensor

Control" indicator ﬂashes red again, the ﬁlter cartridge

is so heavily soiled that it must be washed in a washing

machine. Use a gentle programme at max. 30 °C and

the lowest spin speed.

New ﬁlters can be obtained from our after-sales ser-

vice, if required.

Cleaning the ﬂoor tool

Before carrying out any maintenance, switch off the

vacuum cleaner and disconnect it from the charging

cable.

Fig. 18

a) Release the brush roller using the release button and

pull it sideways out of the ﬂoor tool.

b) Using the groove provided, cut through threads and

hairs wound round the rollers with scissors and then

remove them.

c) Push the brush roller in sideways along the guide rod in

the ﬂoor tool and lock in place using the release button.

Caution: The ﬂoor tool must only be put into operati-

on with the brush roller ﬁtted.

Care

Before cleaning the hand vacuum cleaner, it must

be switched off and disconnected from the charging

cable. The vacuum cleaner and plastic accessories can

be cleaned with an ordinary plastic cleaner.

! Caution: Do not use abrasive materials, glass-

cleaning agents or all-purpose cleaning products.

Never immerse the vacuum cleaner in water.

Subject to technical modiﬁcations.

* Depending on model

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BCH6L2561 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch BCH6L2561 Manual

Product: