700948
40
Zoom out
Zoom in
Previous page
1/106
Next page
38
Power level 3 3
Vacuuming at full power and with the electric brush
switched on.
For particularly demanding cleaning tasks on all sur-
faces (carpets, in particular) and when using an op-
tional accessory. The appliance achieves a shorter
run time at this level.
Fig.
7
During short pauses in vacuuming, the appliance can
be left standing anywhere in the room. To do this, tilt
the vacuum cleaner forwards slightly in the direction
of the nozzle.
!
Caution: When the appliance is left standing, it must
be switched off, because if the brush is turning while
the appliance is standing still, it could cause damage
to the floor covering.
Vacuuming with accessories
Fig.
8*
a) Plug the accessory adapter into the hand vacuum clea-
ner and lock into place.
To release the accessory adapter, press the release
button and pull out the accessory adapter.
b) Fasten the carrying strap to the handle. When doing so,
lay down the appliance; do not rest it on the adapter
or the hose.
Fig.
9*
Fit nozzles as required to the flexible hose with the ac-
cessory adapter handle:
Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
Crevice nozzle for vacuuming crevices and corners,
etc.
After using the appliance
Fig.
10
Switch off the appliance after vacuuming.
Emptying the dust container
Fig.
11
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every
use or, at the latest, when dust at one point in the dust
container has reached the marking.
We recommend that you not fill the dust container bey-
ond the marking, as this leads to considerable soiling
of the filter.
When emptying the dust container, always check how
dirty the outer filter unit is and, if necessary, clean it as
detailed in the "Cleaning the outer filter unit" instruc-
tions. Fig.
16
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
Never vacuum without the outer filter unit and its
fitted filter cartridge.
Fig.
12
Using the release button, unlock the dust container
and remove it from the appliance.
Fig.
13
Take the filter unit out of the dust container.
Empty the dust container.
Fig.
14
Remove any dirt which may have been lodged under-
neath the container ejector opening.
Insert the filter unit into the dust container, making
sure it is correctly seated.
Insert the dust container in the appliance, so that it
'clicks' audibly into place.
!
Caution: If you notice any resistance when inserting
the dust container, check that the filter is complete
and that the filter unit and dust container are correct-
ly seated.
Filter care
Cleaning the plate filter
Your appliance is equipped with a "Sensor Control"
Function.
This function constantly monitors whether your vacu-
um cleaner is reaching its optimum power level. The
indicator light lets you know when you need to clean
the plate filter, so that the vacuum cleaner can reach
its optimum power level once more.
Fig.
15
Sensor Control
The indicator lights up blue or is off when the appli-
ance is working at its optimum level. Once the indica-
tor turns red and flashes, the outer filter unit and filter
cartridge must be cleaned.
The appliance is automatically adjusted to power level
1.
* Depending on model
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch BBH218LTD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch BBH218LTD in the language / languages: All languages as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info