Manual Bosch AXT Rapid 2000 (page 11 of 205) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591560

Zoom out

Zoom in

1/205

English | 11

Bosch Power Tools F 016 L81 148 | (22.10.14)

Keep your face and body away from

the chute assembly.

Do not allow hands or any other part

of the body or clothing inside the

chute assembly, discharge chute or

near any moving part.

Keep proper balance and footing at all

times. Do not overreach. Never stand

at a higher level than the base of the

machine when feeding material.

Always stand clear of the discharge

zone when operating the machine.

When feeding material into the ma-

chine be extremely careful that pieces

of metal, rocks, bottles, cans or other

foreign objects are not included.

If the cutting mechanism strikes any

foreign object or if the machine

should start making any unusual

noise or vibration, immediately

switch off and allow the cutter to

stop. Remove the plug from the

mains supply and take the following

steps:

– Inspect for damage.

– Replace or repair any damaged

parts.

– Check for and tighten any loose

parts.

Do not attempt to repair the machine

unless you are qualified to do so.

Do not allow processed material to

build up in the discharge zone; this

may prevent proper discharge which

can result in kickback of material

through the chute assembly.

If the machine becomes clogged,

switch off and allow the cutter to

stop. Remove the plug from the

mains supply before clearing debris.

Check if guards and protective devic-

es are undamaged and properly

mounted. Before using, carry out any

necessary maintenance and repairs.

Do not tamper with the motor speed

control settings. Contact a Bosch ap-

proved service agent if a problem ex-

ists.

Keep the motor cooling vents clean of

debris and other accumulations to

prevent damage to the motor or pos-

sible fire.

Never pick up or carry the machine

while the motor is running.

Switch off, allow the cutter to stop

and remove the plug from the mains

supply whenever you leave the work

area.

Do not tilt the machine while it is run-

ning.

Do not expose the machine to rain.

Only store the machine in a dry place.

Maintenance and Storage

When the machine is stopped for ser-

vicing, inspection, or storage, or to

change an accessory, switch off and

remove the plug from the mains sup-

ply and allow the machine to cool.

Make sure that all moving parts have

come to a complete stop before mak-

ing any inspections, adjustments,

etc.

Maintain the machine with care and

keep it clean.

Examine the machine and replace

worn or damaged parts for safety.

Ensure replacement parts fitted are

Bosch approved.

OBJ_BUCH-2230-001.book Page 11 Wednesday, October 22, 2014 9:25 AM

Stopped working, changed the fuse but only a short whine then stops again. Please help thank you. Submitted on 12-8-2022 at 10:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AXT Rapid 2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AXT Rapid 2000 Manual

Product: