1131
11
Zoom out
Zoom in
Previous page
1/69
Next page
English - 3
The rotational direction switch 3 must be turned to
the right. The feed intake 1 must be empty.
Starting:
Set the on/off switch 2 to I.
Stopping:
Set the on/off switch 2 to O.
The motor will coast after switching off!
Rotational direction switch
The rotational direction switch 3 can only be oper-
ated when the machine is switched off. Always wait
for the machine to stop before switching it on again.
Right position ():
The spiral cutting knives pull in the material and
shreds it.
Left position ():
The spiral cutting knives are operating in reverse di-
rection and jammed material is released.
Longer material standing out from the ma-
chine could lash out when being pulled in
by the knives! Please keep at safe distance!
Overload Protection
Overloading (e. g. blocking up of the spiral cutting
knives) causes the machine to stop after a few sec-
onds. After a short period, the machine can be
switched on again. If the machine blocks turn off. Set
the On/Off switch 2 to O, then wait a few seconds
and turn it back to I.
If the blockage does not clear, turn the rotational di-
rection switch 3 to the left position ( ) and switch
the machine on to release the blockage. If the block-
age does not clear, repeat.
After the blockage has released, turn the On/Off
switch 2 to O and the rotational direction switch 3
to the right position ( ) before switching the ma-
chine on again.
Restart Protection
After a mains failure the machine cannot restart on it
own when the power returns.
Always wear eye protection and wear gloves
during use.
In order to collect the shredded material, fasten the
carrying straps of the collecting bag 7 (accessory) to
the two hooks 9.
Feed the material to be shredded. The material is
pulled in by the spiral cutting knives.
Longer material standing out from the ma-
chine could lash out when being pulled in
by the knives! Please keep at safe distance!
Only insert as much material so that the feed in-
take 1 will not be blocked up.
Shred withered, moist material and garden waste
which has been stored for some days alternately
with branches. This prevents the cutter from clog-
ging and helps to mix the material for composting.
Do not fill soft waste such as kitchen rubbish into the
shredder but compost directly.
Always feed the material to be shredded from the
corner of the feed intake 1 marked with the arrow.
Take care that the shredded material can fall freely
from the discharge chute 8 danger of backing up!
The ventilation slots 5 must not be covered by the
collecting bag or the shredded material.
Branches become harder to shred depending on the
type, age and dryness of the wood.
For best results, shred fresh branches soon after
they have been cut.
Soft garden waste should be shredded in smaller
loads, particularly when wet. Any blockages can be
avoided by intermittently shredding branches.
Starting and Stopping
3 2
Working Instructions
Advice on Shredding
1
F016 L70 438 - book.book Seite 3 Dienstag, 28. Februar 2006 3:26 15
11 F016 L70 438 06.02
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AXT 1600 HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AXT 1600 HP in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info