Manual Bosch ASM 32 (page 19 of 236) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79161

Zoom out

Zoom in

1/236

English | 19

Bosch Power Tools F 016 L70 798 | (15.4.11)

The connection lead must be inspected for signs

of damage at regular intervals and may only be

used if in perfect condition.

If the supply cord is damaged, it must be re-

placed by a Bosch Service Centre.

Products sold in GB only: Your product is fitted

with a BS 1363/A approved electric plug with in-

ternal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fit-

ted in its place by an authorised customer serv-

ice agent. The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a mains socket elsewhere.

Products sold in AUS and NZ only: Use a resid-

ual current device (RCD) with a rated residual

current of 30 mA or less.

Assembly

f Ensure the cables are not trapped when

folding/unfolding top/bottom handles. Do

not drop the handles.

Handle assembly (see figure A)

Fix the handle bottom 6 to the body of the mow-

er using pivot pins 13.

Ensure that the pivot covers 12 are fitted to the

handle bottom 6.

f Ensure that the handle stop 11 is fitted to

the right hand side when operating the

mower (ASM 32).

Attach the handle top 1 with the bolts and the

wing nuts to the handle bottom 6.

Note: Ensure that the cable clip supplied is used

to fix the cable to the handle.

Attach cable to cable restraint 5 ensuring that

sufficient cable slack is available. (see figure B)

Remove transport packaging/label from the

mower, the blades will require adjustment – see

“Blade Maintenance (see figure G)”.

Snap together the grassbox and fitting/remov-

ing the grassbox (ASM 32) (see figure C1)

Snap together the grassbox and fitting/remov-

ing the grassbox (ASM 32 F) (see figure C2)

Snap together the grassbox.

Attach/remove the grassbox as shown.

Adjusting the Cutting Height (see figure D)

f Stop, release switch lever and wait until the

motor stops before adjusting height. The

blades continue to rotate after the machine

is switched off, a rotating blade can cause in-

jury.

The lawnmower can be set to several cutting

heights.

For this purpose, press the height of cut lever 9

outward (n) then move up or down (o) to the

desired cutting height while supporting the

weight of the mover with the other hand.

For the first cutting of the season, a high cutting

height should be selected.

Operation

Starting

f The blade continues to rotate for a few sec-

onds after the machine is switched off. Al-

low the motor/blade to stop rotating before

switching “on” again.

f Do not rapidly switch off and on.

Note: To aid starting push handle down to lift

front wheels.

Starting (see figure E)

n Press and hold the safety button 3.

o Squeeze the switch lever 2 towards

the handle.

Release the safety button 3.

Stopping

Release the switch lever 2.

n o Snap together both top and bottom half

of the grassbox.

p Attach/remove the grassbox as shown.

OBJ_BUCH-1393-001.book Page 19 Friday, April 15, 2011 10:36 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ASM 32 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ASM 32 Manual

Product: