Manual Bosch ART 35 (page 11 of 197) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707805

Zoom out

Zoom in

1/197

English | 11

Bosch Power Tools F 016 L81 763 | (29.8.17)

Keep the supply cables away from mov-

ing hazardous parts and avoid damage

to the cables; this can lead to contact

with live parts.

The connections (plugs and sockets)

should be kept dry and off the ground.

The supply cables must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cable on the product is

damaged, it must only be replaced by a

Bosch Service Centre.

Only use approved extension cables.

Extension cords, cables, leads, reels

should only be used if they comply with

EN 61242/IEC 61242 or

IEC 60884-2-7.

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– Nominal Conductor Area of

1.25 mm

or 1.5 mm

– Maximum length of 30 m for a Cord

Extension Set or maximum length of

60 m for a Cable Reel with Residual

Current Device (RCD

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service Cen-

tre.

WARNING! Inadequate exten-

sion cables can be dangerous.

Extension cable, plug and

socket must be of watertight con-

struction and intended for outdoor

use.

For products not sold in GB:

WARNING: For your safety, it is re-

quired that the plug attached to the

product is connected with the exten-

sion cord. The coupling of the exten-

sion cord must be protected against

splash water, be made of rubber or

coated with rubber. The extension cord

must be used with a cable strain relief.

Products sold in GB only: Your prod-

uct is fitted with a BS 1363/A ap-

proved electric plug with internal fuse

(ASTA approved to BS 1362).

If the plug is not suitable for your

socket outlets, it should be cut off

and an appropriate plug fitted in its

place by an authorised customer ser-

vice agent. The replacement plug

should have the same fuse rating as

the original plug.

The severed plug must be disposed of

to avoid a possible shock hazard and

should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only:

Use a residual current device (RCD)

with a rated residual current of 30 mA

or less.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the garden product in a better

and safer manner.

OBJ_BUCH-1800-004.book Page 11 Tuesday, August 29, 2017 8:22 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 35 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ART 35 Manual

Product: