537951
28
Zoom out
Zoom in
Previous page
1/209
Next page
English - 6
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove battery before investigating fault.
Fault Finding
Symptom Possible Cause Remedy
Can not fit Guard over
cutting disc
Incorrect assembly Remove cutting disc and fit guard, see
also Product assembly
Machine fails to operate Battery discharged Recharge battery, see also Charging
advice
Machine functions
intermittently
Machines internal witing damaged
On/Off switch defective
Contact Service Agent
Contact Service Agent
Excessive vibration/
noise
Machine fault
Blade broken
Contact Service Agent
Replace blade
Cutting time low on one
battery charge
Battery not used for long period or ini-
tial usage
Grass too high
Battery worn out
Fully charge battery, see also charging
advice
Cut in stages
Replace the battery
Blade will not move Battery discharged
Machine fault
Recharge battery, see also Charging
advice
Contact Service Agent
Machine is not cutting Blade broken
Battery not fully charged
Grass entangled around cutting disc
Replace blade
Recharge battery, see also Charging
advice
Remove grass
No charging procedure
possible due to defective
battery
The battery temperature is not within
the allowable temperature range
The contacts of the battery are con-
taminated
The battery is defective, due to a dis-
connection in the battery (individual
cells)
Get the battery temperature within the
allowable temperaturerange (0 °C to
45 °C) either by cooling down or warm-
ing up. As soon as the battery temper-
ature is within the allowable tempera-
ture range again, the battery charger
automatically switches to rapid charg-
ing
Clean the contacts (e. g. by inserting
and removing the battery several
times) or replace the battery, as re-
quired
Replace the battery
The LED indicator 14
does not light up after
plugging the mains plug
into the socket and insert-
ing the battery into the
charging compartment 16
The charger plug is not inserted (prop-
erly)
Socket, cable or charger are defective
Insert the plug (fully) into the socket
Check the mains voltage and if neces-
sary, have the battery charger
checked by an authorized customer
service station for Bosch power tools
F 016 L70 348.book Seite 6 Mittwoch, 21. Januar 2009 4:24 16
20 • F 016 L70 444 • TMS • 13.11.08
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ART 26 ACCUTRIM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 26 ACCUTRIM in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info