Manual Bosch ART 2300 COMBITRIM (page 18 of 194) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

537961

Zoom out

Zoom in

1/194

English - 4

Remove stones, loose pieces of wood and

other objects from the cutting area.

The cutting line continues to rotate for a few sec-

onds after the trimmer is switched off. Allow the

motor/cutting line to stop rotating before switch-

ing “on” again.

Do not rapidly switch off and on.

Switching On and Off

Press switch 1 and hold depressed. Release

switch 1 for switching off.

Cutting Grass

Move the trimmer left and right, keeping it well away

from the body.

The trimmer can efficiently cut grass up to a height

of 15 cm. Cut taller grass in stages.

Remove the wheels when cutting long grass

(ART 30/3000 COMBITRIM only).

Cutting Very Long Grass/Weeds

The product is supplied with Extra Strong Line and a

fixing spool, fit as described in spool maintenance.

Fitting the Extra Strong Line for very long tough con-

ditions will improve the performance and give better

results.

Trimming Edges

Guide the trimmer along the edge of the lawn. Do not

allow the cutting line to contact paved surfaces,

stones or garden walls, since this will wear the line

rapidly.

For better control use the plant protector 9

(ART 30/3000 COMBITRIM only – available as an

accessory for ART 23/26/2300/2600 COMBITRIM)

as a guide.

Cutting Around Trees and Bushes

Carefully cut around trees and bushes so that they

do not come into contact with the cutting line.

Plants can die if you damage the bark.

For better control use adjustable handle and use the

plant protector 9 (ART 30/3000 COMBITRIM only –

available as an accessory for ART 23/26/2300/2600

COMBITRIM).

Do not feed and cut off excess line in edg-

ing position (see figure J). Feed button 20

may become hot.

The rotating line can wear or break. You will notice

when the motor runs without load and no grass is

cut.

While operating the trimmer press the ground or

a solid surface, then release (necessary pressure

approx. 3 kg). This action will allow the feed but-

ton 20 to release the line out. The spool will release

approx. 4 cm of line per action.

When the line breaks off completely, feed twice to

regain the full cutting circle.

If the line is exceeding the maximum cutting cir-

cle it will be cut by the blade 24 integrated in the cut-

ting guard 10.

Stop and remove plug from the power sup-

ply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as loose

fixings, and worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the trimmer should happen to fail despite the care

taken in manufacture and testing, repair should be

carried out by an authorized customer service agent

for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Stop and remove plug from the power sup-

ply.

Replacing the Line Spool

Hold the spool plate 23 in position.

Turn the spool cover 21 counter-clockwise and re-

move.

Take the empty spool 25 out from the spool cover.

Thread the line of the new/refilled spool through the

eyehole 22 and place the spool in the spool

cover 21.

Pull approx. 9 cm of line out of the spool.

Place spool with cover 21 on the spool plate in the

correct position (bayonet fastening), press down and

turn fully clockwise (click).

Fitting Extra Strong Line Spool

Hold the spool plate 23 in position.

Turn the spool cover 21 counter-clockwise and re-

move.

Cutting and Edging

Feeding the Line

Maintenance

Spool Maintenance

F 016 L70 621.book Seite 4 Montag, 30. November 2009 3:03 15

18 • F 016 L70 621 • 09.11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 2300 COMBITRIM in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ART 2300 COMBITRIM Manual

Product: