537964
13
Zoom out
Zoom in
Previous page
1/17
Next page
English | 13
Bosch Power Tools F 016 L70 777 | (27.10.10)
Mounting the Cutting Disc/Blade
Press the cutting disc 17 onto the drive shaft
(click). (see figure C)
Position the blade 10 onto the pin 18, push it
down and pull it outward until it engages.
(see figure D)
Operation
Starting
f Remove stones, loose pieces of wood and
other objects from the cutting area.
f The blade continues to rotate for a few sec-
onds after the cordless trimmer is switched
off. Allow the motor/blade to stop rotating
before switching “on” again.
f Do not rapidly switch off and on.
Inserting the Battery
Insert the battery into the machine as shown.
The battery must be felt to engage.
Switching On
Press the lock-off button 2 and hold while actu-
ating the On/Off switch 1.
Release the lock-off button 2 again.
Switching Off
Release the On/Off switch 1.
Note: There is a short delay in the motor starting
after engaging the on/off switch 1.
Adjustment
Using the Adjustable Handle (see figure E)
The adjustable handle 5 can be set in various po-
sitions:
Adjusting the Trimmer Length (see figure F)
Adjusting the Trimmer-head Angle
(see figure G)
To change the cutting angle, press the foot ped-
al 12 down and move the shaft 7 to the request-
ed position.
Release the foot pedal 12.
Adjusting for Edging Mode (see figures HI)
Adjusting the trimmer-head angle:
Moving the trimmer head:
Working Advice
Protect the battery from heat, for ex-
ample continuous exposure to sun ra-
diation and fire.
Product will not function if tempera-
ture is below 0 °C or above 45 °C!
Cutting Grass (see figure J)
Move the cordless trimmer left and right, keep-
ing it well away from the body.
The trimmer can efficiently cut grass up to a
height of 15 cm. Cut higher grass in stages.
Trimming Edges
Guide the cordless trimmer along the edge of
the lawn. Avoid contact with paved surfaces,
stones or garden walls, as this will wear the
blade rapidly.
For better control, use the plant protector 19
(accessory) as a guide. (see figure K)
n To change the position, loosen the handle
screw 4 and move the adjustable handle 5.
o Tighten the handle screw 4 securely to fix
the adjustable handle 5 in the adjusted posi-
tion.
n Turn the adjusting collar 6 by 90°.
o Pull the shaft out to increase the height, or
push the shaft in to decrease the height. Re-
tighten the adjusting collar 6.
n Press the foot pedal 12 down.
o Move the shaft 7 to the lowest position. Re-
lease the foot pedal 12 again.
n Loosen the adjusting collar 6.
o Turn the shaft 7 by 90° to adjust the trim-
mer head 9 for trimming/edging as shown.
Re-tighten the adjusting collar 6.
H
I
OBJ_BUCH-627-003.book Page 13 Wednesday, October 27, 2010 4:22 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ART 23 LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ART 23 LI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info