Manual Bosch aquatak clic 135 (page 16 of 130) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

382378

Zoom out

Zoom in

1/130

16 | English

F 016 L70 546 | (13.1.11) Bosch Power Tools

Safety Notes

Before start-up please read these in-

structions!

Before using the machine please read

the operating instructions for your

unit and comply in particular with

these safety instructions. Please

keep the instructions safe for later

use.

The warning and information signs attached to

the unit provide important information for safe

operation.

Apart from the information in the operating in-

structions comply with the general safety reg-

ulations and regulations for the prevention of

accidents.

Never direct the water jet at peo-

ple, animals, the unit or electric

components.

Power supply

f The voltage indicated on the rating plate

must correspond to the voltage of the power

source.

f We recommend that this equipment is only

connected into a socket which is protected

by a circuit-breaker that would be actuated

by a 30 mA residual current.

f If the supply cord is damaged, it must be re-

placed by the manufacturer, its service agent

or similarly qualified persons in order to

avoid a hazard.

f Never touch the mains plug with wet hands.

f Do not pull plug while operating the device.

f Do not run over, crush or pull the power sup-

ply cable or extension lead, otherwise it may

be damaged. Protect the cable from heat, oil

and sharp edges.

f Do not use the appliance, if the power supply

cable or important parts, e. g. high-pressure

hose, trigger gun or safety devices are dam-

aged.

f Warning: Inadequate extension cords can be

dangerous.

f If an extension cord is used, the plug and

socket must be of watertight construction.

The extension cord must have a cross section

in accordance with the operating instruc-

tions and be protected against splashed wa-

ter. The connection must not be in water.

f When replacing plugs on the power supply

cable or extension lead the spray water

guard and mechanical stability must remain

intact.

Water connection

f Comply with the regulations of your water

supply company.

f All connecting hoses must have properly

sealed joints.

f The appliance should never be used on the

drinking water supply without a back flow

valve. Water which has passed the back flow

valve is regarded as undrinkable.

f The high-pressure hose must not be dam-

aged (danger of bursting). A damaged high-

pressure hose must be replaced immediate-

ly. Only use hoses and connections recom-

mended by the manufacturer.

f High-pressure hoses, fittings and couplings

are important for the safety of the appliance.

Use only hoses, fittings and couplings recom-

mended by the manufacturer.

Application

f Before use, check that the unit and operating

equipment are in perfect condition and are

safe to operate. Do not use the unit if it is not

in perfect condition.

f Do not direct the jet against yourself or oth-

ers in order to clean clothes or footwear.

f Never draw in solvent-containing liquids, un-

diluted acids, acetone or solvents! This in-

cludes petrol, paint thinners, heating oil. The

sprayed vapour is highly flammable, explo-

sive and toxic.

OBJ_BUCH-764-002.book Page 16 Thursday, January 13, 2011 3:33 PM

The supply cable on my Aquatec Click 135 will not rewind.
How can I fix this Submitted on 17-4-2017 at 18:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch aquatak clic 135 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch aquatak clic 135 Manual

Product: