Manual Bosch aquatak 1500 si (page 14 of 88) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

381788

Zoom out

Zoom in

1/88

EURO • Printed in Italy • BA F016 L69 837 • AQUATAK 1300/1500 • OSW 12/01

English - 3

Electrical Safety

Your machine requires an earth connection. The op-

erating voltage is 230 V AC, 50 Hz. Only use ap-

proved extension cables. Contact your Bosch Serv-

ice Center for details.

If you want to use an extension cable when operat-

ing your high pressure washer, only the following ca-

ble dimensions should be used:

1.5 mm

- max length 20 m

2.5 mm

- max length 50 m

Note: If an extension cable is used it must be

earthed and connected through the plug to the earth

cable of your supply network in accordance with pre-

scribed safety regulations.

If in doubt contact a qualified electrician or the near-

est Bosch Service Center.

WARNING! Inadequate extension cables can be

dangerous. Extension cable, plug and socket

must be of watertight construction and intended

for outdoor use.

Cable connections should be kept dry and off

ground.

It is recommended for increased electrical safety to

use a Residual Current Device (RCD) with a tripping

current of not more than 30 mA. Always check your

RCD every time you use it.

For products not sold in GB: WARNING: For

safety, it is essential that the mains plug 6 attached

to the machine is fitted to the power supply cable.

The couplings of connection leads must be pro-

tected against splashes and the coupling sockets on

the leads must be made of rubber or coated with

rubber. Fixing means for the connection leads must

be used.

If the supply cord is damaged, it must be replaced by

a Bosch Service Center.

Products sold in GB only: Your machine is fitted with

an approved 13 A (BS 1363/A) electric plug and is

protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fit-

ted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Water connection

Screw connector 7 onto machine water inlet connec-

tion 8. (see figure )

Attach water supply hose (not supplied) to the mains

water supply and machine. (see figure / )

Connecting high pressure water supply

hose/nozzle

Securely screw high pressure hose 6 onto machine

at connection 9. (see figure )

Inserting the extension lance 4 into the power gun 3.

Depress and turn the extension lance 4 90° clock-

wise to lock in place. (see figure )

Inserting the vario-jet-fan nozzle 10 into the exten-

sion lance 4 and turn the vario-jet-fan nozzle 10

clockwise until it “clicks”, it is now locked in place.

(see figure )

Vario-jet-fan nozzle

(yellow-1300 Si/green-1500 Si colour coded)

Twist the nozzle sleeve to adjust from a pencil to a

fan jet and vice versa. (see figure )

To apply the detergent move the nozzle from high

pressure mode to low pressure mode by pulling the

nozzle forward. (see figure )

To adjust the spray patten twist the nozzle.

(see figure )

Roto nozzle

(yellow-1300 Si/orange-1500 Si colour coded)

Turn the Jet-fan nozzle 10 anti-clockwise to extract

it from the extension lance 4. (see figure )

Inserting the Roto nozzle 12 into the extension

lance 4 and turn the Roto nozzle 12 clockwise until

it “clicks”, it is now locked in place. (see figure )

Starting

Open water tap.

Press the safety lock 1 to release the trigger 2. Fully

press the trigger 2 until there is a constant flow of

water. Release trigger 2. Press the trigger safety

lock. (see figure )

Press button ( ) on main switch 5.

Point the power gun 3 downwards. Press the trigger

safety lock to release the trigger 2. Fully press the

trigger 2. (see figure )

For Your Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,

damaged or entangled.

Assembly

Adjustments and using different

nozzles

Starting and Stopping

A B

F016 L69 837.book Seite 3 Donnerstag, 20. Dezember 2001 8:37 08

14 • F016 L69 837 • TMS • 14.12.01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch aquatak 1500 si in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch aquatak 1500 si Manual

Product: