1169

Bosch AQUATAK 115 PLUS Manual

15
Zoom out
Zoom in
Previous page
1/91
Next page
English - 3
15 • F016 L70 372 • TMS • 15.09.05
Note: If an extension cable is used it must be
earthed and connected through the plug to the earth
cable of your supply network in accordance with pre-
scribed safety regulations.
If in doubt contact a qualified electrician or the near-
est Bosch Service Centre.
WARNING! Inadequate extension cables can be
dangerous. Extension cable, plug and socket
must be of watertight construction and intended
for outdoor use.
Cable connections should be kept dry and off
ground.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For products not sold in GB: WARNING: For safety,
it is essential that the mains plug attached to the
product is fitted to the power supply cable. The cou-
plings of connection leads must be protected against
splashes and the coupling sockets on the leads must
be made of rubber or coated with rubber. Fixing
means for the connection leads must be used.
If the supply cord is damaged, it must be replaced by
a Bosch Service Centre.
Products sold in GB only: Your product is fitted with
an approved 13 A (BS 1363/A) electric plug and is
protected by a 13 A fuse (ASTA Approved to
BS 1362).
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fit-
ted in its place.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.
Water connection
Screw inlet connector 8 onto machine water inlet
connection 12.
/ Attach water supply hose (not supplied) to
the mains water supply and machine.
Connecting high pressure water
supply hose/nozzle
Securely screw high pressure hose 5 onto ma-
chine at connection 13.
Inserting the vario-jet/fan power lance 4 into the
power gun 3. Depress and turn the vario-jet/fan
power lance 90° clockwise to lock in place.
Vario-jet-fan power lance (red colour coded)
Twist the front ring to adjust from a pencil to a fan
jet and vice versa.
Roto power lance (red colour coded)
Turn the vario-jet/fan power lance 4 90° anti-
clockwise. Extract the vario-jet/fan power lance.
Insert the roto-power lance 7 into the power
gun 3. Depress and turn the roto-power lance 90°
clockwise to lock in place.
Detergent nozzle and bottle
AQUATAK 110
Turn the power lance 90° anti-clockwise. Extract
the power lance.
Insert the detergent-nozzle 6 into the power
gun 3. Depress and turn the detergent-nozzle 90°
clockwise to lock in place.
AQUATAK 110 PLUS/115 PLUS
To apply the detergent twist the rear ring as
shown from high pressure mode to low pressure
mode.
To adjust the spray pattern twist the front ring.
Starting
Connect the product to the mains supply ensuring
that the mains switch is in the ( ) position.
Open water tap.
Press the safety lock 1 to release the trigger 2.
Fully press the trigger 2 until there is a constant flow of
water to clear the air from the machine and water supply
hose. Release trigger 2. Press the trigger safety lock.
Press button ( ) on main switch 10.
Point the power gun 3 downwards. Press the trigger
safety lock to release the trigger 2. Fully press the
trigger 2.
Stopping
Release trigger 2. Press the trigger safety lock. The
power gun is now locked and can not be operated
accidentally.
Press button ( ) on the main switch 10.
Close water tap. Unplug the machine from the elec-
tric supply.
Press the trigger safety lock 1 to release the trig-
ger 2. Fully press the trigger 2 until there is no more
water pressure in the machine. Release trigger 2.
Press the trigger safety lock 1.
Disconnect water supply hose from machine and
water supply.
Assembly
A
A B
C
D
Adjustments and using
different nozzles
Starting and Stopping
E
I
J
I
F
G
K
F016 L70 372 - GB Seite 3 Donnerstag, 6. Oktober 2005 9:35 09
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-aquatak-115-plus

Reset search

  • Spray gun not working presses down but no water coming out Submitted on 6-6-2023 at 13:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AQUATAK 115 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AQUATAK 115 PLUS in the language / languages: Dutch as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info