1167
14
Zoom out
Zoom in
Previous page
1/91
Next page
English - 2
14 • F016 L70 372 • TMS • 15.09.05
The product is intended for cleaning areas and objects
outside the house, tools, vehicles and boats. Drainage
pipes can be unclogged and rust or paint coatings can
be removed, if the appropriate accessories such as
cleaning agents approved by Bosch are used.
Intended Use is related to operation within 0 °C and
40 °C ambient temperature.
This product should not be used for professional
use.
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately 7.0 kg. If necessary, obtain assistance to re-
move from packaging.
Carefully remove the machine from its packaging
and check that you have all the following items:
Power washer
Power gun/high pressure hose
Detergent nozzle and bottle
(AQUATAK 110 only)
Vario-jet-fan power lance (red colour coded)
Roto power lance (red colour coded)
Inlet Connector
Wash Brush
(AQUATAK 110 PLUS/115 PLUS only)
Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 Trigger safety lock
2 Trigger
3 Power gun
4 Vario-jet-fan power lance
5 High pressure hose
6 Detergent nozzle and bottle
(AQUATAK 110 only)
7 Roto power lance
8 Inlet Connector
9 Detergent Tank
(AQUATAK 110 PLUS/115 PLUS only)
10 Main switch
11 Serial Number
Not all of the accessories illustrated or described are
included as standard delivery.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz (for non-EU countries 220 V, 240 V
as applicable). Only use approved extension cables.
Contact your Bosch Service Centre for details.
If you want to use an extension cable when operat-
ing your high pressure washer, only the following ca-
ble dimensions should be used:
1.5 mm
2
– max length 20 m
2.5 mm
2
– max length 50 m
Product Specification
Power washer AQUATAK 110 AQUATAK 110 PLUS AQUATAK 115 PLUS
Part number 3 600 H76 C.. 3 600 H76 D.. 3 600 H76 E..
Rated power [W] 1 600 1 600 1 700
Supply Temperature max. [°C] 40 40 40
Supply rate min. [l/h] 17 17 17
Supply pressure max. [bar] 1.5 6.0 1.5 6.0 1.5 6.0
Working pressure [bar] 100 100 105
Max. Operating pressure [bar] 110 110 115
Flow rate [l/h] 360 380 380
Detergent Bottle or Tank Bottle Tank Tank
Detergent capacity [l] 0.5 0.75 0.75
Weight [kg] 7.0 7.0 7.0
Protection class / II / II / II
Serial Number See serial No 11 (rating plate) on product.
Intended Use
Introduction
Delivered Items
Operating Controls
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
F016 L70 372 - GB Seite 2 Donnerstag, 6. Oktober 2005 9:35 09
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AQUATAK 110 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AQUATAK 110 PLUS in the language / languages: Dutch as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info