1165
13
Zoom out
Zoom in
Previous page
1/97
Next page
English - 1
13 • F016 L70 370 • TMS • 06.09.05
Before start-up please read these instruc-
tions!
Before using the machine please read the
operating instructions for your unit and
comply in particular with these safety in-
structions. Please keep the instructions
safe for later use.
The warning and information signs attached to the
unit provide important information for safe opera-
tion.
Apart from the information in the operating instruc-
tions comply with the general safety regulations
and regulations for the prevention of accidents.
Never direct the water jet at people, ani-
mals, the unit or electric components.
Warning: High pressure jets can be dan-
gerous if subject to misuse.
Power Supply
The voltage indicated on the rating plate must corre-
spond to the voltage of the power source.
We recommend that this equipment is only con-
nected into a socket which is protected by a circuit-
breaker that would be actuated by a 30 mA residual
current.
If an extension cord is used, the plug and socket
must be of a water tight construction.
Warning: Inadequate extension cords can be dan-
gerous.
Never touch the mains plug with wet hands.
Do not run over, crush or pull the power supply cable
or extension lead, otherwise it may be damaged.
Protect the cable from heat, oil and sharp edges.
The extension lead must have a cross section in ac-
cordance with the operating instructions and be pro-
tected against splashed water. The connection must
not be in water.
Water connection
Comply with the regulations of your water supply
company.
All connecting hoses must have properly sealed
joints.
The high-pressure hose must not be damaged (dan-
ger of bursting). A damaged high-pressure hose
must be replaced immediately. Only use hoses and
connections recommended by the manufacturer.
Application
Before use, check that the unit and operating equip-
ment are in perfect condition and are safe to operate.
Do not use the unit if it is not in perfect condition.
Never draw in solvent-containing liquids, undiluted
acids or solvents! This includes petrol, paint thinners
heating oil. The sprayed vapour is highly flammable,
explosive and toxic; also acetone, undiluted acids
and solvents as these corrode the materials used on
the unit.
The appropriate safety regulations must be observed
when using the unit in dangerous area (e.g. petrol
stations). It is forbidden to operate the unit in poten-
tially explosive locations.
The unit must be placed on solid base.
Only use detergents recommended by the manufac-
turer and comply with the application, disposal and
warning instructions of the detergent manufacturers.
All current-conducting components in the working
area must be protected against splashed water.
The gun trigger must not be jammed in the “ON” po-
sition during operation.
Suitable protective clothing must be worn if neces-
sary to protect against splashing from some parts.
Vehicle tyres/tyre valves may only be cleaned from a
minimum distance of 30 cm, otherwise the vehicle
tyre/tyre valve could be damaged by the high-pres-
sure jet. The first indication of this is a discoloration
of the tyre. Damaged vehicle tyres/tyre valves can be
deadly dangerous.
Materials containing asbestos and other materials
which contain substances which are hazardous to
your health must not be sprayed.
Only use detergents which have been approved by
the manufacturer of the unit.
Detergents must not be used undiluted. The prod-
ucts are safe to use as they contain no acids, alkalis
or substances which are detrimental to the environ-
ment. We recommend that the detergents are kept
out of the reach of children. If detergent comes into
contact with the eyes wash immediately with plenty
of water and if swallowed contact a doctor immedi-
ately.
Operation
The operator must use the unit in accordance with
the regulations. He/she must take local conditions
into account and be aware of other people, espe-
cially children, when operating the unit.
Do not use the appliance within the range of persons,
unless they wear protective clothing.
Do not direct the jet against yourself or others in or-
der to clean clothes or footwear.
The unit may only be used by authorised persons
who have received training or have demonstrated
their ability to operate the unit. The unit must not be
operated by children or juveniles (danger of acci-
dents due to incorrect use of the unit).
The unit must never be left unsupervised while the
motor is running.
The water jet from the high-pressure nozzle pro-
duces a recoil on the gun. You should therefore hold
the gun and spray lance firmly.
Transport
Switch off the motor and secure the unit before trans-
porting.
Maintenance
Remove the plug from the socket:
whenever you leave the unit unattended for any pe-
riod
checking, cleaning or working on the unit
Repairs may only be carried out by authorised
BOSCH Service Centres.
Accessories and spare parts
Only use accessories and spare parts which have
been approved by BOSCH. Original accessories and
spare parts guarantee that the unit can be operated
safely and without any breakdowns.
Safety Notes
F016 L70 370 - GB Seite 1 Donnerstag, 29. September 2005 2:57 14
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AQUATAK 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AQUATAK 10 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info