Manual Bosch AQT 37-13 (page 9 of 207) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

537977

Zoom out

Zoom in

1/207

English | 9

Bosch Power Tools F 016 L70 995 | (16.12.13)

Entsorgung

Hochdruckreiniger, Zubehör und Verpackungen sollen einer

umweltgerechten Wiederverwertung zugeführt werden.

Werfen Sie Hochdruckreiniger nicht in den Hausmüll!

Nur für EU-Länder:

Gemäß der Europäischen Richtlinie

2012/19/EU über Elektro- und Elektronik-

Altgeräte und ihrer Umsetzung in nationales

Recht müssen nicht mehr gebrauchsfähige

Elektro- und Elektronikgeräte getrennt ge-

sammelt und einer umweltgerechten Wie-

derverwertung zugeführt werden.

Änderungen vorbehalten.

English

Safety Notes

Explanation of symbols

General hazard safety alert.

Never direct the water jet at people, ani-

mals, the unit or electric components.

Warning: High pressure jets can be dan-

gerous if subject to misuse.

According to the applicable regulations, the

appliance must never be used on the drinking

water network without a system separator.

Use a separator as per IEC 61770 Type BA.

Water flowing though a system separator is

considered not drinkable.

Safety Notes for pressure washer

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious in-

jury.

The warning and information signs attached to the unit

provide important information for safe operation.

Apart from the information in the operating instructions

comply with the general safety regulations and regula-

tions for the prevention of accidents.

Power supply

 The voltage indicated on the rating plate must correspond

to the voltage of the power source.

 We recommend that this equipment is only connected into

a socket which is protected by a circuit-breaker that would

be actuated by a 30 mA residual current.

 Remove the plug from socket whenever the machine is left

unattended for any period.

 The electric supply installation should comply with

IEC 60364-1.

 If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified per-

sons in order to avoid a hazard.

 If the plug is damaged, pay attention to the following:

 Plugs and sockets situated near the work site or outdoors

should be to class IP 55 of BS 5490 to provide adequate

protection against ingress of water, etc. and cable entries

require effective sealing. Rubber shrouds should be pro-

vided over cable glands. Drip-proof (class IP X2 of

BS 5490) plugs and sockets to BS 4343 are suitable for

use indoors where the plug is away from the water spray

area where the appliance is in use.

 Never touch the mains plug with wet hands.

 Do not pull plug while operating the device.

 Do not run over, crush or pull the power supply cable or ex-

tension lead, otherwise it may be damaged. Protect the ca-

ble from heat, oil and sharp edges.

 Do not use the appliance, if the power supply cable or im-

portant parts, e. g. high-pressure hose, trigger gun or safe-

ty devices are damaged.

 Warning: Inadequate extension cords can be dangerous.

 If an extension cord is used, the plug and socket must be of

watertight construction. The extension cord must have a

cross section in accordance with the operating instruc-

tions and be protected against splashed water. The con-

nection must not be in water.

 When replacing plugs on the power supply cable or exten-

sion lead the spray water guard and mechanical stability

must remain intact.

Water connection

 Comply with the regulations of your water supply compa-

ny.

 All connecting hoses must have properly sealed joints.

 Make sure that the supply hose is at least 12.7 mm (1/2")

in diameter and is reinforced.

 The appliance should never be used on the drinking water

supply without a back flow valve. Water which has passed

the back flow valve is regarded as undrinkable.

 The high-pressure hose must not be damaged (danger of

bursting). A damaged high-pressure hose must be re-

placed immediately. Only use hoses and connections rec-

ommended by the manufacturer.

 High-pressure hoses, fittings and couplings are important

for the safety of the appliance. Use only hoses, fittings and

couplings recommended by the manufacturer.

 Only clean or filtered water should be used for intake.

Application

 Before use, check that the unit and operating equipment

are in perfect condition and are safe to operate. Do not use

the unit if it is not in perfect condition.

 Do not direct the jet against yourself or others in order to

clean clothes or footwear.

OBJ_BUCH-1953-005.book Page 9 Monday, December 16, 2013 1:37 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AQT 37-13 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AQT 37-13 Manual

Product: