591697
11
Zoom out
Zoom in
Previous page
1/156
Next page
English | 11
Bosch Power Tools F 016 L70 917 | (22.10.13)
Please take care to place down the pole pruner with the oil filler
cap facing upward.
When storing in the sales packaging, the oil reservoir must be
completely emptied.
Do not modify this product.
Unauthorized modifications
may impair the safety of your product and may result in in-
creased noise and vibration.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” in combination with power unit
AMW 10 (3 600 HA3 0..) is in conformity with the following
standards or standardization documents: EN 60335,
En ISO 11680-1 according to the provisions of the directives
2011/65/EC, 2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 107 dB(A).
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
22.10.2013
Noise/Vibration Information
The following information is applicable for the attachment oper-
ated by the power unit:
Measured sound values determined according to
EN ISO 11680.
Typically the A-weighted noise levels of the product are: Sound
pressure level 84.5 dB(A); sound power level 104.5 dB(A). Un-
certainty K =2.5 dB.
Vibration total values (triax vector sum): Vibration emission val-
ue a
h
= 4.5 m/s
2
, Uncertainty K= 2.5 dB.
Mounting and Operation
Tension saw chain
Unfasten the locking knob on cover.
Turn the chain locking screw in housing next to the chain bar
clockwise to tension and anti-clockwise to loosen the saw chain.
The saw chain is correctly tensioned, if on top it can lifted off
2 –3 mm.
Tension the locking knob. Pull the chain in reverse with your
hand. The saw chain must glide easily on the chain bar but not be
too loose off the bar.
Troubleshooting
Pole Pruner Attachment AMW SG
Article number
0 600 8A3 B..
Chain bar length
mm 300
Chain speed (no-load)
m/s 12
Chain, width
mm 1.3
Oil tank volume
ml 150
Weight according to
EPTA-Procedure 01/2003
without power unit kg 1.55
Serial number
see type plate on the gar-
den product
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure
Delivery Scope 1
Open cover 2
Assemble / tension saw chain 3
Fitting the multi-tool attachmentt 4
Filling oil 5
Working Advice 6
Storage 7
Selecting Accessories 8
Problem Possible Cause Corrective Action
Saw chain dry No oil in reservoir Refill oil
Oil passage clogged Clean oil passage
Saw chain/guide bar hot No oil in reservoir Refill oil
Chain tension too high Tension saw chain
Dull saw chain Sharpen saw chain or replace
OBJ_BUCH-1676-002.book Page 11 Tuesday, October 22, 2013 11:57 AM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMW SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMW SG in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info