591696
8
Zoom out
Zoom in
Previous page
1/98
Next page
8 | English
F 016 L70 916 | (22.10.13) Bosch Power Tools
Intended Use
This multi-tool attachment can only be operated by the power
unit AMW 10.
The machine is intended for cutting and trimming hedges and
bushes in domestic use.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” in combination with power
unit AMW 10 (3 600 HA3 0..) is in conformity with the follow-
ing standards or standardization documents: EN 60335,
EN ISO 10517 according to the provisions of the directives
2011/65/EC, 2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 103 dB(A).
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
14.10.2013
Noise/Vibration Information
Measured sound values determined according to
EN ISO 10517.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80.5 dB(A); sound power level
100.5 dB(A). Uncertainty K =2.5 dB.
Vibration total values (triax vector sum): Vibration emission
value a
h
= 2.5 m/s
2
, Uncertainty K= 1 dB.
Mounting and Operation
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Pole Hedgecutter Attachment AMW HS
Article number
0 600 8A3 A..
Cutting length
mm 430
Tooth opening
mm 15
Weight according to
EPTA-Procedure 01/2003
without power unit kg 2.25
Serial number
see type plate on the gar-
den product
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure
Delivery Scope 1
Turn and fix blade in operating position 2
Fitting the multi-tool attachmentt 3
Setting Handle Angle 4
Working Advice 5
Storage 6
Problem Possible Cause Corrective Action
Motor runs but blades re-
main stationary
Multitool-attachment not properly connected to
power unit
Check for correct assembly
Cutting blade hot Cutting blade blunt Have blade sharpened
Cutting blade has dents Have blade inspected/overhauled
Too much friction, due to lack of lubricant Mit Schmieröl (1 609 200 399) einsprühen
OBJ_BUCH-1670-002.book Page 8 Tuesday, October 22, 2013 8:05 AM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMW HS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMW HS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info