697454
109
Zoom out
Zoom in
Previous page
1/170
Next page
AMAX panel Address programming | en 109
Bosch Security Systems B.V. Installation Manual 2019.08 | 11 | F.01U.309.277
8 Address programming
With a LED/LCD keypad it is mandatory to use address programming.
With a text keypad both address programming and installer menu programming are possible.
Programming with keypad is possible only when all of zones in the system are in disarmed
status and no alarm is activated. The installer code is required for programming.
The control panel programming options are stored in a non-volatile flash memory. This
memory has all relevant configuration and user-specific data even after a total power loss.
Because the data retention time is quite long without power, reprogramming is not required
after powering up the control panel.
Notice!
It is not recommended to use other keypads or methods simultaneously to program the
system while programming with the current keypad.
The following chapters show an overview of all relevant programming options and their
addresses according to the descriptions in the chapter Settings, page 30.
8.1 Service mode
Option Address Default
Service mode expiration time (0 = disabled, 1 - 999 =
enabled)
1702 - 1704 090
Service mode report (0 = disabled, 1 = enabled) 1705 0
Service mode alarm output (0 = disabled, 1 = enabled) 1706 0
Service mode keypad buzzer (0 = disabled, 1 = enabled) 1707 0
8.2 Communication and report programming
8.2.1 Receiver programming
The following table shows how to program the numbers, keys, and functions for a telephone
number via address programming or via installer menu programming.
Digit required Number to program via
address programming
Button to press via installer
menu programming
0 - 9 0 - 9 0 - 9
* 11 * 1
# 12 * 2
4 sec pause 13 * 3
Terminal 15 Not required
The following table shows how to program the numbers, keys, and functions for a subscriber
ID number via address programming or via installer menu programming.
Digit required Number to program via
address programming
Button to press via installer
menu programming
0 - 9 0 - 9 0 - 9
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info