697454
30
Zoom out
Zoom in
Previous page
1/170
Next page
30 en | Settings AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
6 Settings
This chapter describes the settings of the AMAX panel in the same order as they appear in the
menu structure of the text keypad. For an overview of the menu structure, refer to Text keypad
programming, page 94.
The settings can be configured either via a text keypad or via the PC software A-Link Plus.
For information on how to configure the settings via a text keypad and how to navigate a text
keypad, refer to Text keypad programming, page 94.
For information on how to connect the AMAX panel to a PC, refer to Communication with PC
software, page 105.
6.1 Communication and reporting
This section outlines the programming information required for the AMAX panel when
communicating with a base station receiver. These parameters specify the telephone
numbers/IP address to be called, transmission formats, and internet communication options.
6.1.1 Receivers
Receiver telephone number / IP address and port
The AMAX panel can report event information from an on-board dialer, which can call four
different receivers and four different telephone numbers. The dialer reports to receiver 1 to 4
by programming. You can program the dialer with 4 separate telephone numbers/IP addresses
and ports, reporting format type and subscriber ID number, and internet communication
options if necessary.
Example
You can set up dialer 1 to report to receiver 1 in Bosch Network (Conettix) format and set up
dialer 2, dialer 3, and dialer 4 to report to a receiver of a central monitoring station in Contact
ID format only, if dialer 1 is unsuccessful.
How to program a telephone number via a text keypad
1. Enter the digits of a telephone number in the text keypad.
2. To enter a 4-sec pause in the dialing sequence, enter [*] [3].
A pause might be necessary when the dialer communicates through an old (slower)
telephone exchange or when a PABX system is in place.
How to program a telephone number via address programming
1. Enter one digit of a telephone number in each address for the telephone numbers.
2. To enter a 4-sec pause in the dialing sequence, insert “13”.
A pause might be necessary when the dialer communicates through an old (slower)
telephone exchange or when a PABX system is in place.
3. To terminate the input, insert “15”.
Example for address programming
To program the telephone number “9672 1055” as the telephone number for receiver 1,
program the following sequence into address 000 - 016:
[9 6 7 2 1 0 5 5 15 x x x x x x x x] (x stands for any digit)
To program the number “02 pause 9672 1055”, program the following sequence into
address 000 - 016:
[0 2 13 9 6 7 2 1 0 5 5 15 x x x x x]
The following table shows how to program the numbers, keys, and functions for a telephone
number via address programming or via installer menu programming.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info