697454
26
Zoom out
Zoom in
Previous page
1/170
Next page
26 en | Installation AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
5.4 System status indicator
The AMAX panel indicates the system status by using the LED status indicator on the system
main board.
Slow flash of red on status indicator (repeating on and off with an interval of one second)
indicates a normal system operation.
5.5 Certification
Prerequisites for certification conform installation
The AMAX panel is certified. To realize a usage of the system conformable to the certification
described in this chapter, the following prerequisites have to be fulfilled:
Use one of the following possibilities for devices:
Two supervised warning devices (PO-1 PO-2 & PO+) and one ATS 2 communicator
(onboard dialer, B426-M or D4020)
One self powered warning device and one ATS 2 communicator (onboard dialer,
B426-M or D4020)
Two communicators, one ATS 2 (onboard dialer, B426-M or D4020) and one ATS 1
(onboard dialer, B426-M or D4020)
One ATS 3 communicator (DX4020 or B426-M)
Connect all communicators to a central monitoring station.
Only use the onboard dialer and the option bus communicator for alarm transmission.
Connect one 12V / 7AH or one 12V / 18Ah battery to the system.
Ensure the maximum current for all components with a 7Ah Battery to be 550mA.
Ensure the maximum current for all components with a 18Ah Battery to be 1500mA
(standby 12h, recharge battery 80% in 72h) (PCB =l 00mA, IUI-AMAX Keypads = 31mA,
DX2010 = 35mA, DX3010 = 10mA, B426-M = 100mA, B450-M = 180mA, RF3227E = 30mA,
RFRC-OPT = 30mA).
Make sure to have an indication of the arm / disarm status accessible from outside the
monitored area (this indication has to be time limited).
Use one of the following methods for the access to the monitored area:
Starting the entry procedure by opening a door
Indicating the arm / disarm status
Preventing the access to the monitored area (e.g. mechanical door strike)
Only use the enclosure lock only in non EN setup.
Only use the telephone arming in non EN setup.
Only mount additional modules (except input module DX2010) inside the enclosure.
If one or more communicator modules are mounted in an extra enclosure, this enclosure
must have a tamper protection.
Install the tamper skirt on the PCB of the input module DX2010, if the input module
DX2010 is mounted on the external enclosure (AE20).
Program the system with the EN settings indicated on the programming sheet.
Remove the EN indication (on label) if the system is set without EN parameters.
Connect no more than 10 devices to one zone input (Panel, Keypad, Input Module, RFUN,
…)
For an EN50136-1, -2 SP4 compliant installation, select the transmission format "SIA
DC09 (2x ID)".
5.5.1 EN 50131-3 Grade 2, Environmental Class 2 - AMAX 2100 / 3000 / 3000
BE / 4000
Certification Body:
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info