697457
36
Zoom out
Zoom in
Previous page
1/158
Next page
Contact your central monitoring station for the correct setting.
Network Polling Time
The polling is used for both panel and remote receiver to know whether the network
connection is good or not. Each time when a polling is due, the AMAX panel will send a polling
message. The polling time range is from 1 to 999 minutes. For time less than 3 digits, use 0 to
fulfill.
Contact your central monitoring station for the correct setting.
Reports
System Reporting
Report Transmission Sequence
If the event has disabled the report (option 0), no report is sent out. If the report has any
destination to contact the panel (option 1, 2, 3, 4, 5, 6, 7), It will call the related destination
by related reporting format type and subscriber ID Number.
Attempt rules:
1. Attempt times and duration
Within the report expiring time the AMAX panel will retry sending the report to each
enabled destination till the report has been sent to the destination, or till the report
buffer overflows and the old report is replaced by new incoming reports.
For each enabled destination, the retry interval time between two retries is 15
seconds for the 1st retry to 4th retry, and the retry interval time between two retries
is 10 minutes for the 5th retry to 8th retry, after the 8th retry the retry interval time
between two retries is 60 minutes.
2. Attempt Priority
The attempt priority is destination 1, 2, 3, 4 Domestic. The disabled destinations will
be ignored.
3. Communication Fail Fault
If the attempt times for one destination reaches 4, the system will cause the
communication fail fault for this destination.
4. Backup Destination Process
The AMAX panel can save up to a maximum of 50 un-reported events. If the un-
reported events are more than 50, it will delete earlier event and only save the last
50 events in the buffer to send out.
Sequential Logic to Send Report
If the event reporting path is set to 0, the relevant reports will not be sent
If the event reporting path is set to a single path (receiver 1, 2, 3, or 4), the AMAX panel
will send reports to corresponding paths
If the event reporting path is set to all paths (receiver 1, 2, 3, 4) and any one of these
paths fails, the communication path will fail
If the event reporting path is set to sending report to receiver 1, with receiver 2, 3, 4 as
backup, the AMAX panel will send report to receiver 1 first. Only if send report to receiver
1 fails,the AMAX panel attempts to send report to 2, 3 and 4 in succession.
Communication path fault will occur when all valid paths fail. Communication path fault
will recover when any one of the paths recovers
Display of faults
When multiple reports are queued for delivery, the communication path fault is displayed as a
logic or relationship. Example:
7.1.2
36 en | Settings AMAX 2100 / 3000 / 4000
2013.10 | 01 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info