697457
31
Zoom out
Zoom in
Previous page
1/158
Next page
To program the IP Address and port:
Use no punctuation in IP address. If any unit of IP address is less than 3 digits, use 0 to fulfill
the data in the higher bits. The remaining 5 digits will program the port. Port number ranges
from 0-65535. If port number is less than 5 digits, use 0 to fulfill the data.
Example
To program the IP Address 10.16.1.222:80 as the IP Address of Receiver 1, enter the following
sequence into Address 000 - 016:
[0 1 0 0 1 6 0 0 1 2 2 2 0 0 0 8 0]
Notice!
Programming option anti-replay, acknowledge wait time, and pulse interval time are only used
in Conettix IP.
Telephone number for Receiver 1 - 4/IP Address and Port
When the corresponding data format for above programming address is a network
communication format, it is explained as an IP Address, and Port. For a non network format, it
is explained as telephone number.
AMAX panel contacts the telephone number / IP Address of the central monitoring station in
order to transmit a report. If the contact is successful, the relevant information is transmitted,
and the communicator returns to Standby Mode.
Contact your monitoring station for the correct telephone number / IP Address before you
program these addresses.
Receiver Subscriber ID Number
Receiver 1 - 4 Subscriber ID Number
The Subscriber ID Number is transmitted to identify the calling AMAX panel. Digits from 0 to 9
and letters from B to F are only valid. Enter the Subscriber ID Number in the six addresses
provided for each destination. If a Subscriber ID Number is less than 6 digits, use 0 to full fill
the data in the higher bits.
Example
Program Subscriber ID Number as 4729 in six addresses: [0 0 4 7 2 9]
Receiver Transmission Format
Transmission Format
Receiver 1 - 4 Transmission Format
You can select the transmission format with Address options to specify how to transmit the
information to the base station receiver. If Contact ID or SIA format is selected, the
information is transmitted by telephone line; if Bosch Network is selected, then it is
connected with B426 / DX4020 or ITS-DX4020G GPRS. Transmission format is defaulted as
Contact ID.
Transmission Formats (Contact ID, SIA, Conettix IP)
The AMAX panel 4000 provides three kinds of transmission formats, Contact ID, SIA, and
Conettix IP format for its dialing and communication features. Program the transmission
format for Receiver 1, 2, 3, and 4 separately in Address 023, Address 053, Address 083, and
Address 113 (refer to Transmission Format). The AMAX panel is set at the factory to report in
the Contact ID Format.
AMAX 2100 / 3000 / 4000 Settings | en 31
Bosch Sicherheitsysteme GmbH Installation Guide 2013.10 | 01 | F.01U.267.112
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX 4000 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX 4000

Bosch AMAX 4000 User Manual - English - 24 pages

Bosch AMAX 4000 User Manual - English - 36 pages

Bosch AMAX 4000 Quick start guide - English - 38 pages

Bosch AMAX 4000 Installation Guide - German - 170 pages

Bosch AMAX 4000 Quick start guide - German - 34 pages

Bosch AMAX 4000 Installation Guide - Dutch - 166 pages

Bosch AMAX 4000 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info