Manual Bosch ALM 34 (page 13 of 71) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

634123

Zoom out

Zoom in

1/71

EURO • Printed in England • BA F016 L69 850 • ALM 34 • OSW

English - 3

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fit-

ted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

➊ Position the handle bottom 6 at the rear of the

motor cover.

➋ Line up the holes and secure with the pivot

pins 10 provided.

➌ Attach the handle top 3 with the bolts and wing

nuts 8 to the handle bottom 6.

Note: Ensure that the cable clips supplied are used

to fix the cable to the handle.

Attach cable to cable restraint 5 ensuring that suffi-

cient cable slack is available. (see figure )

The handle can be set in three positions, as in

figure C:

I Park position

II Handle location for mowing

III Handle location to enable mower to be hung on

walls.

To move the handle from location I or III to mowing

location II press together the tubes of the handle

bottom 6.

Stop, release switch lever, wait until the

motor stops and remove the plug before

adjusting height. The blades continue to

rotate after the machine is switched off, a

rotating blade can cause injury.

Your machine has four settings which adjust the

height of cut between 10-32 mm (figure D):

For the first cutting of the season, a high cutting ad-

justment should be selected.

Changing height of cut is achieved by rearranging

the position of the spacers 14:

Place the handle in vertical position and turn the

mower on its side. Inspect the blade 13 and fan 15,

if blunt or damaged replace.

Hold the blade 13 using gardening gloves (not pro-

vided) use the spanner/scraper provided to remove

the blade nut 12, spacers 14 and blade 13.

Fit the blade 13, rearrange the spacers 14 to obtain

desired setting (figure D) and fit the blade nut 12.

Ensure that the blade 13 is the correct way up (so

that this symbol can be seen located as in

figure D) and tighten the blade nut 12 firmly.

Always fit the three spacers 14. Do not fit extra

spacers.

The blade continues to rotate for a few

seconds after the machine is switched off.

Allow the motor/blade to stop rotating be-

fore switching “on” again.

Do not rapidly switch off and on.

To aid starting tilt mower to side.

Starting:

Press and hold the safety button 2.

(Figure E)

Squeeze the switch lever 1 towards the han-

dle.

Release the safety button 2.

Stopping:

Release the switch lever 1.

The motor cover is designed with a flexible mounting

and tilts to improve directional control.

Place the lawnmower on the edge of the lawn, as

close to the power point as possible. Work away

from the power point as in figure F. Then at right an-

gles.

Position the cable to opposite side (already cut) at

the end of each turn.

When mowing do not allow the motor to la-

bour particularly in heavy conditions.

When the motor labours the speed of the motor

drops and you will hear a change in the motor

sound, when this occurs stop mowing, release

switch lever and raise the height of cut. Failure to

do so could damage the machine.

Assembly (see figure )

Handle Adjustment

Adjusting the Cutting Height

Starting and Stopping

Mowing

F016 L69 850.book Seite 3 Donnerstag, 17. Januar 2002 1:58 13

13 • F 016 L69 850 • TMS • 15.01.02

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ALM 34 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ALM 34 Manual

Product: