105962
19
Zoom out
Zoom in
Previous page
1/153
Next page
English - 19
19 • F016 L70 506 • TMS • 19.10.07
The chain saw is intended for sawing of trees, tree
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
This manual gives instructions on the correct as-
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.
Carefully remove the machine from its packaging
and check for complete contents:
Chain saw
Cover plate
Chain
Chain bar
Chain guard
Chain oil (80 ml)
Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 Rear handle
2 On/Off switch
3 Lock-off button
4 Oil filler cap
5 Activation lever for kickback brake
(hand guard)
6 Deactivation mark for kickback brake
7 Front handle
8 Nose sprocket
9 Chain guard
10 Chain
11 Chain bar
12 Gripping teeth
13 Tensioning ring (red)
14 Locking knob
15 Cover plate
16 Chain tensioning catch
17 Fastening bolt
18 Guide fins for chain bar
19 Oil outlet
Product Specification
Chain saw AKE 30-19 S AKE 35-19 S AKE 40-19 S
Part number (typ) 3 600 H36 D.. 3 600 H36 E.. 3 600 H36 F..
Tool-less chain tensioning (SDS)
Rated power [W] 1900 1900 1900
Chain speed (no load) [m/s] 12 12 12
Chain bar length [cm] 30 35 40
Nose sprocket
Kickback Brake
Run down brake
Chain type 3/8" - 90 3/8" - 90 3/8" - 90
Drive link thickness [mm] 1.1 (0.043") 1.1 (0.043") 1.1 (0.043")
Amount of drive links 45 52 57
Oil reservoir capacity [ml] 200 200 200
Automatic oiler
Metal gripping teeth
Weight without mains cable. approx. ** [kg] 4.2 4.3 4.4
Protection class / II / II / II
**measured with chain bar and chain
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Intended Use
Introduction
Delivered Items
Operating Controls
A
F016 L70 506 - GB Seite 19 Dienstag, 23. Oktober 2007 3:20 15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AKE 40-19S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 40-19S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AKE 40-19S

Bosch AKE 40-19S User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 153 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info