78524
26
Zoom out
Zoom in
Previous page
1/159
Next page
English - 9
26 F016 L70 360 TMS 11.07.06
For SDS models only, reverse the chain tensioning
catch 16 by removing the screws and refitting it on
the opposited side.
Check drive sprocket 21. If it is worn out or damaged
due to strain, have it exchanged by an authorized
Bosch service agent.
Have your chain sharpened professionally at your
Bosch approved service agent or sharpen the chain
yourself using the Bosch sharpening kit or a Dremel
power tool with the appropriate grinder (1453), both
available at your Bosch approved service agent. Fol-
low the sharpening instructions supplied with the
sharpening kit.
Proper functioning of the automatic oiler can be
checked by running the chain saw and pointing the
tip of the chain bar towards a piece of cardboard or
paper on the ground. Caution: Do not touch the
ground with the chain. Ensure safety clearance of
20 cm. If an increasing oil pattern developes, the au-
tomatic oiler is operating fine. If there is no oil pat-
tern, despite a full oil reservoir, see Fault Finding or
contact your Bosch approved service agent.
Chain and Chain bar
AKE 30-18 S..................................... F 016 800 259
AKE 35-18 S..................................... F 016 800 260
AKE 40-18 S..................................... F 016 800 261
Chain
AKE 30-18 S..................................... F 016 800 256
AKE 35-18 S..................................... F 016 800 257
AKE 40-18 S..................................... F 016 800 258
Cleaning
Chain sharpening/cleaning kit.......... F 016 800 262
Chain oil 1 litre...................................2 607 000 181
Chain oil 5 litre.................................. F 016 800 111
Additional accessories
Gloves ...............................................2 607 000 134
Protective goggles............................ F 016 800 178
SNR 19 ear protectors
(sounding proofing level 19 dB (A))...2 607 990 042
SNR 24 ear protectors
(sounding proofing level 24 dB (A))...2 607 990 043
Clean the moulded plastic housing of the chain saw
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Remove all debris, especially
from the motor cooling vents 27.
Remove and brush clean the cover plate 15, chain
and chain bar after 1 to 3 hours of use.
Clean the area under the cover plate 15, the drive
sprocket 21 and chain bar assembly using a soft
brush. Clean oil outlet 19 with a clean cloth.
If the chain tensioning mechanism becomes dif-
ficult to operate, dismantle the protective lid 29 from
inside the cover plate 15. Turn locking knob 14 and
red tensioning ring 13 against each other, so that
debris is loosened from the mechanism and can be
discarded. Carefully knock out debris. If mechanism
is heavily clogged, use a soft brush or compressed
air for cleaning. Do not use tools of any kind.
If the chain saw is to be stored for a longer period of
time, clean chain and chain bar.
Store in a secure, dry place out of the reach of chil-
dren. Do not place other objects on the chain saw.
To prevent leakage ensure machine is left in a hori-
zontal position (oil filler cap 4 uppermost).
When storing machine in original packaging the oil
tank have to be completely emptied.
Sharpening Chain
Checking the Automatic Oiler
Accessories
Cleaning/Storage
B
J
F016 L70 360 - GB Seite 9 Dienstag, 18. Juli 2006 9:20 09
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AKE 40-18S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 40-18S in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info