Manual Bosch AKE 35 (page 17 of 135) (Dutch)

1151

Zoom out

Zoom in

1/135

English - 2

17 • F016 L70 362 • TMS • 24.01.06

■ Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■ Use the power tool, accessories and tool bits

etc., in accordance with these instructions and in

the manner intended for the particular type of

power tool, taking into account the working con-

ditions and the work to be performed. Use of the

power tool for operations different from those in-

tended could result in a hazardous situation.

Service

■ Have your power tool serviced by a qualified re-

pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Chain Saw Safety Warnings:

■ Wear safety glasses and hearing protection. Fur-

ther protective equipment for head, hand, legs

and feet is recommend. Adequate protective cloth-

ing will reduce personal injury by flying debris or ac-

cidental contact with saw chain.

■ Keep all parts of the body away from the saw

chain when the motor is operating. Before you

start the saw, make sure the saw chain is not

contacting anything. A moment of inattention while

operating chain saws may cause entanglement of

your clothing or body with the saw chain.

■ Do not operate a chain saw in a tree. Operation of

a chain saw in a tree, may result in personal injury.

■ Secure work. Operate chain saw safely and always

with both hands. Secure loose wood or logs with

brackets, saw horse or appropriate means when

sawing. Use clamps or a vice to hold the wood.

■ When cutting a limb that is under tension be alert

for spring back. When the tension in the wood fibres

is released the spring loaded limb may strike the op-

erator and/or throw the chain saw out of control.

■ Use extreme caution when cutting brush and

saplings. The slender material may catch the saw

chain and be whipped toward you or pull you off bal-

ance.

■ Carry the chain saw by the front handle with the

saw chain stopped and the guide bar pointing to

the rear. When transporting or storing the chain

saw always fit the guide bar cover. Proper han-

dling of the chain saw will reduce the likelihood of ac-

cidental contact with the moving saw chain.

■ Follow instructions for lubricating, chain ten-

sioning and changing accessories. Improperly

tensioned or lubricated chain may either break or in-

crease the chance for kickback.

■ Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

■ Cut wood only. Don’t use chain saw for purposes

not intended – for example – Don’t use chain saw

for cutting plastic, masonry or non-wood build-

ing materials. Use of the chain saw for operations

different then intended could result in a hazardous

situation.

Causes and Operator Prevention of Kickback:

– Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in

and pinches the saw chain in the cut.

– Tip contact in some cases may cause a sudden re-

verse reaction, kicking the guide bar up and back to-

wards the operator.

– Pinching the saw chain along the top of the guide bar

may push the guide bar rapidly back towards the op-

erator.

– Either of these reactions may cause you to lose con-

trol of the saw which could result in serious personal

injury. Do not rely exclusively upon the safety de-

vices built into your saw. As a chain saw user, you

should take several steps to keep your cutting jobs

free from accident or injury.

Kickback is the result of tool misuse and/or incorrect op-

erating procedures or conditions and can be avoided by

taking proper precautions as given below:

■ Maintain a firm grip, with thumbs and fingers en-

circling the chain saw handles, with both hands

on the saw and position your body and arm to al-

low you to resist kickback forces. Kickback forces

can be controlled by the operator, if proper precau-

tions are taken. Do not let go of the chain saw.

■ Do not over reach and do not cut above shoulder

height. This helps prevent unintended tip contact

and enables better control of the chain saw in unex-

pected situations.

■ Only use replacement bars and chains specified

by the manufacturer. Incorrect replacement bars

and chains may cause chain breakage and/or kick-

back.

■ Follow the manufacturer’s sharpening and main-

tenance instructions for the saw chain. Decreas-

ing the depth gauge height can lead to increased

kickback.

F016 L70 362 - GB Seite 2 Mittwoch, 25. Januar 2006 8:47 08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 35 in the language / languages: Dutch as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AKE 35

Bosch AKE 35 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 139 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AKE 35 Manual

Product: