1125
12
Zoom out
Zoom in
Previous page
1/70
Next page
English - 4
Prior to any maintenance remove plug
from power supply.
Wear gloves when handling or cleaning the cutting
blade.
Always clean the cutting blade after operation and
lubricate with protective spray. During longer cutting
jobs, we recommend periodically lubricating the cut-
ting blade with protective spray.
Visually check the condition of the cutting edges of
the cutting blade
1
. Check tightness of blade bolts.
Ensure that the blade is covered with the blade
guard
7
supplied.
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all debris, especially from the
ventilation slots
4
.
Store the hedgecutter in a secure, dry place out of
the reach of children. Do not place other objects on
top of the machine.
Blade guard AHS 400 - 24T..............2 605 411 160
Blade guard AHS 480 - 24T..............2 605 411 160
Blade guard AHS 550 - 24ST ...........2 605 411 208
Blade guard AHS 600 - 24ST ...........2 605 411 208
Blade guard AHS 650 - 24ST ...........2 605 411 158
Blade guard AHS 6000 PRO-T.........2 605 411 208
Blade guard AHS 7000 PRO-T.........2 605 411 158
Collecto AHS 400 - 24T ....................2 608 005 112
Collecto AHS 480 - 24T ....................2 608 005 114
Collecto AHS 550 - 24ST..................2 608 005 115
Collecto AHS 600 - 24ST..................2 608 005 115
Collecto AHS 650 - 24ST..................2 608 005 113
Collecto AHS 6000 PRO-T ...............2 608 005 115
Collecto AHS 7000 PRO-T ...............2 608 005 113
Lubricant spray .................................1 609 200 399
Clipping sheet .................................. F 016 800 055
Protective goggles ............................2 607 990 041
Gloves...............................................2 607 000 134
The following table gives checks and actions that you can perform if your machine does not operate cor-
rectly. If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault
Blade Maintenance
Cleaning/Storage
Accessories
Fault Finding
Symptom Possible Cause Remedy
Hedgecutter fails to oper-
ate
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Check power
Check other socket, replace
Check cord, replace
Replace fuse
Hedgecutter operates
intermittently
Extension cord damaged
Internal wiring defective
On/Off switch(es) defective
Check cord, replace
Contact service agent
Contact service agent
Motor runs but blades
remain stationary
Internal fault Contact service agent
Cutting blade hot Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of lubri-
cant
Have blade sharpened
Have blade overhauled
Apply lubricant spray
12 • 2 609 932 392 • 04.01
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AHS 6000 PRO-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHS 6000 PRO-T in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info