Manual Bosch AHS 52-16 (page 11 of 70) (Dutch)

1111

Zoom out

Zoom in

1/70

English - 3

11 • F016 L70 369 • TMS • 22.11.05

Fit handle guard as shown.

Starting:

Press and hold rear switch lever 4. Squeeze any

front lever 3.

Stopping:

Release any of switch levers 3 and 4.

Hold the hedgecutter away from yourself

using both hands. Stand in a secure and

stable position.

Position the extension cord over your shoulder to the

rear and ensure that the cord is behind you at all

times during cutting. Never place the cable over the

hedge, where it could easily be cut by the blades.

Cut stems upto 16 mm in thickness. When cutting,

move steadily along the line of cut, so that stems are

fed directly into the cutter blades. The double edge

of the cutting blade enables cutting to either direc-

tion, or with a side to side motion.

Cut the sides of the hedge first, then the top.

To keep the sides flat, cutting upwards with the

growth is recommended. Younger stems tend to

move outwards when cutting them from top to bottom,

resulting in shallow patches or holes in the hedge.

To reach a level finish, fasten a piece of string along

the length of the hedge at the required height and

use as an alignment guide. Cut the hedge just above

the string.

Take care to avoid cutting into objects such as wire,

which could cause damage to the cutting blades and

the drive.

Recommended cutting/trimming times:

– Cut hedges with deciduous leaves in June and

October.

– Cut evergreen hedges in April and August.

– Cut conifer and other fast growing shrubs approx.

every six weeks from May onwards.

– Shaping hedges should be cut to achieve a form

as shown in figure.

Before any work on the machine itself, pull

the mains plug.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Check for obvious defects such as loose, dislodged

or damaged blade, loose fixings and worn or dam-

aged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the hedgecutter should happen to fail despite the

care taken in manufacturing and testing, repair

should be carried out by an authorized customer

service agent for Bosch garden products.

For all correspondence and spare parts orders, al-

ways include the 10-digit part number (TYP) from

the nameplate of the machine!

Before any work on the machine itself, pull

the mains plug.

Wear gloves when handling or cleaning the cutting

blade.

Always clean the cutting blade after operation and

lubricate with protective spray. During longer cutting

jobs, we recommend periodically lubricating the cut-

ting blade with protective spray.

Visually check the condition of the cutting edges of

the cutting blade 1. Check tightness of blade bolts.

Ensure that the blade is covered with the blade

guard 7 supplied.

Clean the exterior of the machine thoroughly using a

soft brush and cloth. Do not use water, solvents or

polishes. Remove all debris, especially from the

ventilation slots 5.

Store the hedgecutter in a secure, dry place out of

the reach of children. Do not place other objects on

top of the machine.

Assembly

Starting and Stopping

Tips on Cutting

C D E

Maintenance

Blade Maintenance

Cleaning/Storage

F016 L70 369 - GB Seite 3 Dienstag, 22. November 2005 5:35 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHS 52-16 in the language / languages: Dutch as an attachment in your email.

The manual is 1,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AHS 52-16

Bosch AHS 52-16 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AHS 52-16 Manual

Product: