Manual Bosch AHS 48 (page 23 of 297) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78317

Zoom out

Zoom in

1/297

English | 23

Bosch Power Tools F 016 L70 729 | (13.12.10)

Firstly, place the battery 6 as shown in the figure

onto the front of the battery charger (n) and

then press the battery 6 down at the rear (o).

To remove the battery, proceed in reverse order.

Due to the intelligent charging method, the

charging condition of the battery is automatical-

ly detected and the battery is charged with the

optimum charging current, depending on bat-

tery temperature and voltage.

This gives longer life to the battery and always

leaves it fully charged when kept in the charger

for storage.

Note: The charging procedure is only possible

when the battery temperature is within the al-

lowable charging temperature range, see sec-

tion “Technical Data”.

Flashing Battery Charge Indicator 10

The charging procedure is sig-

nalled by a flashing battery

charge indicator 10.

Continuous Lighting of the Battery Charge In-

dicator 10

Continuous lighting of the

battery charge indicator 10

indicates that the battery is

fully charged or that the tem-

perature of the battery is not within the allowa-

ble charging temperature range, and cannot be

charged for this reason. The battery is charged

as soon as the allowable charging temperature

range is reached.

When the battery is not inserted, continuous

lighting of the battery charge indicator 10 indi-

cates that the mains plug is inserted in the sock-

et and that the battery charger is ready for oper-

ation.

Charging Advice

With continuous or several repetitive charging

cycles without interruption, the charger can

warm up. This is not meaningful and does not in-

dicate a technical defect of the battery charger.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

The battery is equipped with a NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A

long battery service life is achieved in this man-

ner.

The “Electronic Cell Protection (ECP)” protects

the lithium ion battery against deep discharging.

When the battery is run down or discharged, the

garden product is shut off by means of a protec-

tive circuit: The blade no longer moves.

Do not continue to press the

On/Off switch after the garden

product has been automatically switched off.

The battery can be damaged.

Operation

Initial Operation

Inserting the Battery (see figure A)

Insert the battery into the machine as shown.

The battery must be felt to engage.

Switching On (see figure B)

n Press and hold the On/Off switch 5 on the

rear handle.

o Pull the safety switch 4 upward.

p Then press the front On/Off switch 3.

Switching Off

Release the front 3 or rear 5 On/Off switch.

Working Advice (see figures C–E)

f Warning: Hold the hedgecutter away from

yourself using both hands. Stand in a se-

cure and stable position.

f Always lubricate the cutting blade with pro-

tective spray before use.

Cuts stems up to 15 mm in thickness (max.).

When cutting, move steadily along the line of

cut, so that stems are fed directly into the cutter

blades. The double edge cutting blade enables

cutting in either direction, or with a side to side

motion.

Cut the sides of the hedge first, then the top.

ARN

OBJ_BUCH-564-006.book Page 23 Monday, December 13, 2010 12:55 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHS 48 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AHS 48 Manual

Product: