1101
14
Zoom out
Zoom in
Previous page
1/71
Next page
English - 4
The following table gives checks and actions that you can perform if your machine does not operate cor-
rectly. If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Fault Finding
Symptom Possible Cause Remedy
Hedgecutter fails to oper-
ate
Battery discharged Recharge battery
Hedgecutter operates
intermittently
Internal wiring defective
On/Off switch(es) defective
Contact service agent
Contact service agent
Motor runs but blades
remain stationary
Internal fault Contact service agent
Cutting blade hot Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of lubricant
Have blade sharpened
Have blade overhauled
Apply lubricant spray
Blade will not move
Battery discharged
Blade jammed
Machine fault
Recharge battery
Work blade out of branch with hedgecut-
ter switched off. DO NOT HOLD SWITCH
ON WHEN BLADE IS JAMMED.
Contact service agent
Excessive vibration/noise Machine fault Contact service agent
Cutting time low on one
battery charge
Too much friction, due to lack of lubricant
Blade needs cleaning
Poor cutting technique
Battery not fully charged
Apply lubricant spray
Clean blade
See cutting tips
Recharge battery, see also Charging ad-
vice
No charging procedure
possible due to defective
battery
The contacts of the battery are contami-
nated
The battery is defective, due to a discon-
nection in the battery (individual cells)
Clean the contacts (e. g. by inserting and
removing the battery several times) or re-
place the battery, as required
Replace battery
The LED indicator
10
does
not light up after plugging
the mains plug into the
socket and inserting the
battery into the charging
compartment
The charger plug
11
is not inserted (prop-
erly)
Socket, cable or charger are defective
Insert the plug (fully) into the socket
Check the mains voltage and if neces-
sary, have the battery charger checked
by an authorized customer service sta-
tion for Bosch
garden tools
2 609 932 402 - GB Seite 4 Dienstag, 13. April 2004 4:05 16
14 • 2 609 932 402 • TMS • 13.04.04
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AHS 41 ACCU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHS 41 ACCU in the language / languages: Dutch as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info