777040

Bosch AHM 38 G Manual

8
Zoom out
Zoom in
Previous page
1/43
Next page
EURO • Printed in England • BA F 016 L69 768 • AHM 30/38 • GB • OSW 02/01
English - 2
F016 L69 768 • TMS • 12.00
Coarse:
The roller brackets
4
should be set in one of three
positions according to the type of lawn:
I
for high
range for bumpy lawns,
II
for medium range for av-
erage lawns and
III
fore low range for reasonably
flat lawns. You should only need to make this adjust-
ment once, thereafter use the „Fine“ adjustment to
cut longer or shorter grass.
To change the height of cut:
1. Remove the wingnut
5
and bolt.
2. Reposition the bolt for required height of cut.
3. Refit wingnut
5
.
Fine (X):
Slacken wing nut
5
on both sides of the mower.
Move both roller brackets
4
equally to the required
height of cut.
For best results, place the lawnmower on the edge
of lawn, mow in a forwards direction. Reverse at the
end of the each turn, slightly overlapping the previ-
ous cut strip.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged blades, loose fixings, and
worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the mower should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number from the
nameplate of the machine!
The cutting cylinder should be adjusted if the grass
is not cut cleanly and evenly.
Turn both adjuster knobs
7
clockwise a little at time
until the cutting cylinder
6
lightly brushes the bottom
blade
8
.
Note: The blades act like a pair of shears.
Grassbox AHM 30/38C ..................0 600 886 060
Grassbox AHM 30/38C ..................0 600 886 160
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris.
Turn the machine on its side and clean the blade
area. If grass cuttings are compacted in the blade
area, remove with a wooden or plastic implement.
Store the lawnmower in a dry place. Do not place
other objects on top of the machine.
We guarantee Bosch appliances in accordance with
statutory/country-specific regulations (proof of pur-
chase by invoice or delivery note).
Damage attributable to normal wear and tear, over-
load or improper handling will be excluded from the
guarantee.
In case of complaint please send the machine,
un-
dismantled
, to your dealer or the Bosch Service
Centre for lawn and garden products.
Adjusting the Cutting Height
Mowing
Maintenance
C
D
D
E
Adjusting the Blade
Accessories
After Mowing/Storage
Guarantee
F016 L69 768.book Seite 2 Dienstag, 20. Februar 2001 11:44 11
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AHM 38 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHM 38 G in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 0.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info