697426
22
Zoom out
Zoom in
Previous page
1/28
Next page
22 | Commissioning, inspection and maintenance reports
AGS10-2, AGS10E-2, AGS20-2, AGS50-26 720 811 270 (2015/04)
5. Pump functioning checked in the positions (On/Off/Auto)?
Collector groups
1. Visual inspection of collectors carried out (safe seating, visual impression)?
2)
3)
3)
3)
3)
2. Collector temperature sensor correctly positioned and pushed fully into the
sensor pocket?
3)
3)
3)
3)
3. Visual inspection of the installation system carried out?
3)
3)
3)
3)
4. Visual inspection for leaks carried out at points where mounting structure
meets roofing?
3)
3)
3)
3)
5. Visual inspection of pipework insulation carried out?
3)
3)
3)
3)
6. Visual inspection of glass panes. Cleaning if there is severe contamination?
3)
3)
3)
3)
3)
7. Backup heating is functioning properly?
Solar cylinder
1. Maintenance on solar storage cylinder carried out?
2)
Control system
1. Hours run for solar pump P1:
Period from _________ to _________ / _____ h
4)
2)
__ - __
_____ h
__ - __
_____ h
__ - __
_____ h
__ - __
_____ h
__ - __
_____ h
Hours run for solar pump P2:
Period from _________ to _________ / _____ h
4)
__ - ___
_____ h
__ - __
_____ h
__ - __
_____ h
__ - __
_____ h
__ - __
_____ h
3. Activation/deactivation temperature difference of solar pump ΔT pump 1
checked and entered here?
_ K/_ K _ K/_ K _ K/_ K _ K/_ K _ K/_ K
Activation/deactivation temperature difference of solar pump ΔT pump 2
checked and entered here?
_ K/_ K _ K/_ K _ K/_ K _ K/_ K _ K/_ K
4. Temperature indicated by all temperature sensors (resistances checked)?
5. Temperature sensors correctly positioned, insulated and connected?
6. Maximum cylinder temperature Tmax for solar storage cylinder 1 checked
and entered here?
____ °C ____ °C ____ °C ___ °C ___ °C
Maximum cylinder temperature Tmax for solar storage cylinder 2 checked
and entered here?
____ °C ____ °C ____ °C ___ °C ___ °C
7. Is the required set temperature (backup heating) being maintained by the
controller?
Heat meter (if installed)
1. Period from __________ to __________ / ______ kWh
2)
__ - __
__ kWh
__ - __
__ kWh
__ - __
__ kWh
__ - __
__ kWh
__ - __
__ kWh
2. Temperature sensors correctly positioned, insulated and connected?
Notes
The solar system has been installed and put into operation, or inspected and serviced, in
accordance with all instructions.
The operator has been instructed in the functions and operation of the solar system.
Company stamp / date / signature
1) pH value = indicator of the acid content of a fluid; indicator strips available from chemists or service cases.
2) See instruction manual for the component.
3) Where required.
4) Not all controllers can display the number of hours run. A system runs for approx. 1200-2500 hours a year (depending on the system data).
Commissioning, inspection and maintenance tasks Page
Commission-
ning
Inspection/maintenance
1. 2. 3. 4.
Table 16
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AGS50-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AGS50-2 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info