707776
18
Zoom out
Zoom in
Previous page
1/286
Next page
18 | English
Problem Possible Cause Corrective Action
Extension cable damaged Inspect cable, replace if damaged.
Fuse faulty / blown Replace fuse.
Thermal cut out Allow product to cool and try again.
Product runs intermit-
tently
Extension cable damaged Inspect cable, replace if damaged.
Contact Bosch customer service agent.
Internal wiring of product defective Contact Bosch customer service agent.
Product does not cut Cutting blade/line damaged Replace cutting blade/line (always wear protect-
ive gloves).
Increased vibrations Cutting blade damaged Replace cutting blade (always wear protective
gloves).
Cutting line broken Replace line.
Debris build-up on cutting head Clean cutting head and remove debris.
Blade nut loose Tighten cutting blade nut to 20 Nm, ensuring the
cutting blade, running plate and thrust washer are
mounted centred (always wear protective
gloves).
Cutting blade incorrectly mounted Loosen cutting blade and mount it centred. Ob-
serve guide rings on the cutting blade to ensure
centred alignment.
Poor cutting result and
remaining plant
stumps
Grass too high/dense Grass too high: Cut in stages.
Grass too dense: Reduce cutting rate per cut.
Cutting blade blunt Flip/replace cutting blade
Cutting blade obstructed Check bottom side of product and clear out as ne-
cessary (always wear protective gloves).
Debris build-up on cutting head Clean cutting head and remove debris.
Cutting blade nut can-
not be unscrewed
Damaged thread on nut/shaft Lubricate shaft to aid removal.
Locking pin not located correctly Reinsert locking pin and apply light pressure
whilst rotating shaft.
Cutting blade fails to
rotate
Cutting blade obstructed Check bottom side of product and clear out as ne-
cessary (always wear protective gloves).
Cutting blade nut loose Tighten cutting blade nut to 20 Nm, ensuring the
cutting blade, running plate and thrust washer are
mounted centred (always wear protective gloves)
(see figure E).
Grass too high/dense Grass too high: Cut in stages.
Grass too dense: Reduce cutting rate per cut.
Poor cutting perform-
ance
Cutting guard encrusted with debris Clean inside of cutting guard.
Cutting blade blunt Flip/replace cutting blade.
No cutting line Replenish line.
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
F 016 L81 886 | (19.02.2019) Bosch Power Tools
18


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-afs-23-37

Reset search

  • My Bosch AFS 23-37 will not switch on. I have checked the supply and the fuse, but it just seems like the switch is not operating correctly. When it did work it was difficult to get the switch to operate. Any suggestions Submitted on 9-5-2020 at 17:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AFS 23-37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AFS 23-37 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info