707776
13
Zoom out
Zoom in
Previous page
1/286
Next page
English | 13
u Always wear long heavy trousers,
boots and gloves. Do not wear loose
clothing, jewellery, short trousers,
sandals and never work barefoot. Tie
long hair together over shoulder
height to prevent entanglement in
moving parts.
u Thoroughly inspect the area where
the machine is to be used and re-
move all stones, sticks, wires, bones
and other foreign objects.
u Do not operate the product in areas
where live cables may be present.
u Before using, always visually inspect
to see that the blade or blade nut are
not worn or damaged. Replace worn
or damaged blade and nut in sets to
preserve balance.
u Work only in daylight or in good arti-
ficial light.
u Avoid operating the product in bad
weather conditions especially when
there is a risk of lightning.
u For your safety, please take care
whilst operating the product in wet
grass/brush.
u Walk, never run and stay in a stable
position while working with the
product.
u Keep firm footing and balance. Do
not overreach.
u Wear safety eye protection and
hearing protection when operating
the product.
u Never operate the product with
missing or broken guards, kickback
protection or covers.
u Do not operate the product with the
cutting blade in close proximity to
the mains/extension cable.
u Always check the product for signs
of wear or damage before and after
use.
u If a fault occurs consult
troubleshooting section.
u If an accident occurs, unplug the
product from the mains supply be-
fore before taking any other action.
u Never operate the product when you
are tired, ill or under the influence of
alcohol, drugs or medicine.
u Working on banks can be dangerous.
Do not work on excessively steep
slopes.
Always be sure of your footing on
slopes or wet grass.
Mow across the face of slopesand
never up and down.
− Exercise extreme caution when
changing direction on slopes.
u Do not put hands or feet near the
cutting system.
u Switch off when transporting the
product to and from the area to be
worked on.
u Switch the product off and pull the
mains plug from the socket outlet.
− whenever you leave the product
unattended for a period of time
− before removing blockages
− if the cable is entangled
− before replacing the cutting device
− when checking, cleaning or work-
ing on the product
Bosch Power Tools F 016 L81 886 | (19.02.2019)
13


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-afs-23-37

Reset search

  • My Bosch AFS 23-37 will not switch on. I have checked the supply and the fuse, but it just seems like the switch is not operating correctly. When it did work it was difficult to get the switch to operate. Any suggestions Submitted on 9-5-2020 at 17:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AFS 23-37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AFS 23-37 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info