707773
16
Zoom out
Zoom in
Previous page
1/156
Next page
16 | English
1 609 92A 43W | (6.9.17) Bosch Power Tools
Technical Data
Assembly
Before any work on the vacuum cleaner itself, pull the
mains plug.
Mounting the Vacuum Hose
Vacuuming function (see figure A1)
Insert the vacuum hose 16 into the hose connection piece
3 and turn it all the way in clockwise direction.
Blower Function (see figure A2)
The blower function is suitable for cleaning hard-to-reach are-
as or areas in which vacuuming is not possible, e.g. removing
leaves from gravel.
The vacuum cleaner has a blower function. Do not blow
the outgoing air randomly in enclosed areas. Use the
blower function only with the a clean hose. Dusts can be
hazardous to one’s health.
Switch on the vacuum cleaner for at least 5 seconds
(on/off switch 5/mode selector switch 5 set to the “Vacu-
uming” symbol) to clean the vacuum hose 16 of dust de-
posits.
–Turn the vacuum hose 16 all the way in anti-clockwise di-
rection and pull it out of the hose connection piece 3.
Open the exhaust air cover 26.
Insert the vacuum hose 16 into the hose connection piece
25 and turn it all the way in clockwise direction.
Mounting VAC Accessories
The vacuum hose 16 is equipped with a clip system, with
which the VAC accessories (extraction adapter 17, curved
nozzle 18) can be connected.
Fitting the extraction adapter or curved nozzle
(see figure B)
Fit the extraction adapter 17 or the curved nozzle 18 to the
vacuum hose 16 until the two snap fasteners 27 of the vac-
uum hose click into place.
To disassemble, press both snap-fasteners 27 inward and
pull the components apart.
Mounting Nozzles and Tubes
–Then attach the required vacuuming accessory (floor noz-
zle, crevice nozzle, suction tube, etc.) firmly to the curved
nozzle 18 or the extraction adapter 17.
Replacing/Inserting the Dust Bag
(Dry Vacuuming) (see figures C1C2)
You can use a dust bag (accessory) for dry vacuuming. This
makes the dust easier to dispose of.
Replacing/Inserting the Dust Bag (Accessory)
Unlock the latches 8 and remove the vacuum lid 7.
Pull the full dust bag 29 backwards out of the connection
flange 28 and remove it from the vacuum cleaner.
Work the new dust bag over the connection flange of the
vacuum cleaner. Make sure that the dust bag faces com-
pletely against the interior sides of the container 1 over its
full length.
Reattach the vacuum lid 7 again and lock the latches 8.
Changing inserts for the floor nozzle
(see figures D1– D2)
Depending on the vacuuming work to be carried out (dry, wet,
carpet, etc.), you can clip different inserts into the floor noz-
zle 21 (e.g. rubber lip, brush insert).
Press the release buttons 30 on the floor nozzle 21 to re-
lease the insert from the floor nozzle.
Clip the required insert 22/23/24 into the floor nozzle 21.
Wet/dry vacuum cleaner UniversalVac 15 AdvancedVac 20
Article number
0 603 3D1 1.. 0 603 3D1 2..
Rated power input
W 1000 1200
Frequency
Hz 50/60 50/60
Container volume (gross)
l15.020.0
Net volume (for fluids)
l8.513.5
Dust bag contents
l11.816.8
Vacuum (turbine), max.
mbar 240 260
Airflow (turbine), max.
l/s 65 70
Automatic Start/Stop feature
Weight according to EPTA-Procedure 01:2014
kg 6.9 7.6
Protection class
/II /I
Degree of protection
IP X4 IP X4
The values given are valid for nominal voltages [U] of 230 V. For lower voltage and models for specific countries, these values can vary.
Automatic Start/Stop feature*
Rated voltage
max. power
output
min. power
output
EU/AUS 220240 V 2000 W 100 W
UK
220240 V 1800 W 100 W
* Specification of the allowable load of the connected power tool (coun-
try-specific)
OBJ_BUCH-3012-003.book Page 16 Wednesday, September 6, 2017 3:04 PM
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AdvancedVac 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedVac 20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info