Manual Bosch AdvancedRotak 650 (page 13 of 247) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707763

Zoom out

Zoom in

1/247

English | 13

Bosch Power Tools F 016 L81 572 | (6.11.17)

tect the cable from heat, oil and sharp

edges.

The extension lead must have a cross

section in accordance with the oper-

ating instructions and be protected

against splashed water. The connec-

tion must not be in water.

Always wear gardening gloves when

handling or working near the sharp

blades.

Electrical Safety

Warning! Switch off, remove

plug from mains before ad-

justing, cleaning or if cable is

cut, damaged or entangled.

The blades continue to rotate for a

few seconds after the machine is

switched off.

Caution – do not touch the rotating

blade.

Your machine is double insulated for

safety and requires no earth connec-

tion. The operating voltage is 230 V AC,

50 Hz (for non-EU countries 220 V,

240 V as applicable). Only use ap-

proved extension cables. Contact your

Bosch Service Centre for details.

For increased electrical safety use a Re-

sidual Current Device (RCD) with a trip-

ping current of not more than 30 mA.

Always check your RCD every time you

use it.

Keep the supply cables away from mov-

ing hazardous parts and avoid damage

to the cables; this can lead to contact

with live parts.

The connections (plugs and sockets)

should be kept dry and off the ground.

The supply cables must be inspected

for signs of damage at regular intervals

and may only be used if in perfect con-

dition.

If the supply cable on the product is

damaged, it must only be replaced by a

Bosch Service Centre.

Only use approved extension cables.

Extension cords, cables, leads, reels

should only be used if they comply with

EN 61242/IEC 61242 or

IEC 60884-2-7.

If you want to use an extension cable

when operating your product, only the

following cable dimensions should be

used:

– Nominal Conductor Area of

1.25 mm

or 1.5 mm

– Maximum length of 30 m for a Cord

Extension Set or maximum length of

60 m for a Cable Reel with Residual

Current Device (RCD

Note: If an extension cable is used it

must be earthed and connected

through the plug to the earth cable of

your supply network in accordance

with prescribed safety regulations.

If in doubt contact a qualified electri-

cian or the nearest Bosch Service Cen-

tre.

WARNING! Inadequate exten-

sion cables can be dangerous.

Extension cable, plug and

socket must be of watertight con-

struction and intended for outdoor

use.

OBJ_BUCH-3146-001.book Page 13 Monday, November 6, 2017 1:02 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedRotak 650 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AdvancedRotak 650 Manual

Product: