Manual Bosch AdvancedRecip 18 (page 14 of 199) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707754

Zoom out

Zoom in

1/199

14 | English

1 609 92A 4JX | (01.10.2018) Bosch Power Tools

Reciprocating saw AdvancedRecip 18

Tool holder SDS

Stroke mm 23

Max. cutting depth

– in wood mm 100

– in steel (unalloyed) mm 20

– Pipe diameter mm 20

Weight according to

EPTA-Procedure 01:2014

kg 2.1

Weight with 2.5 Ah battery

(PBA18 2,5Ah) according

to EPTA-Procedure

01:2014

kg 2.5

Permitted ambient temperature

– during charging °C 0 to +45

– during operation

and

during storage

°C −20 to +50

Recommended batteries PBA 18V...V -.

PBA 18V...W-.

Recommended chargers AL 22.. CV

AL 18.. CV

A) Limited performance at temperatures <0°C

Noise/vibration information

Noise emission values determined according to

EN 62841-2-11.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 86dB(A); sound power level

dB(A). Uncertainty K=5dB.

Wear hearing protection

Total vibration values a

(triax vector sum) and uncertainty K

determined according to EN62841-2-11:

Cutting boards with saw blade S3456XF:

h,B

=10m/s

, K=1.5m/s

;

Cutting wooden beams with saw blade S3456XF:

h,WB

=10.5m/s

, K=1.5m/s

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure detailed in EN 62841

and may be used to com-pare power tools. They may also be

used for a preliminary estimation of vibration and noise

emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Fitting

u Remove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Charging the battery (see figureB)

u Use only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

u Do not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

To remove the battery (8), press the release button (10)

and pull the battery back and out of the power tool. Do not

use force to do this.

Battery charge-control indicator

When the on/off switch (6) is pressed in halfway or com-

pletely, the battery charge indicator (5) indicates the bat-

tery's state of charge for several seconds. The indicator con-

sists of three green LEDs.

LED Capacity

Continuous light 3 x green > 66%

Continuous light 2 x green 33–66%

Continuous light 1 x green 11–33%

Slowly flashing light 1 x green <11%

The 3 LEDs in the battery charge indicator (5) flash quickly if

the temperature of the battery is above the permitted oper-

ating temperature range.

Inserting/changing the saw blade

u When fitting or changing the saw blade, wear protect-

ive gloves. Blades are sharp and can become hot when

used for prolonged periods of time.

u While replacing the saw blade, ensure that the saw

blade receptacle is free of material residue, e.g. wood

or metal chips.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedRecip 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AdvancedRecip 18 Manual

Product: