707753
15
Zoom out
Zoom in
Previous page
1/231
Next page
u Hold the power tool firmly with both hands and make
sure you have a stable footing. The power tool can be
more securely guided with both hands.
u Always wait until the power tool has come to a com-
plete stop before placing it down.
u Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
u In case of damage and improper use of the battery, va-
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
u Do not open the battery. There is a risk of short-circuit-
ing.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Power tools with electronic control are also suitable for pol-
ishing.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Orbital stroke rate preselection thumbwheel
(2)
On/off switch
(3)
Battery charge indicator
(4)
Battery
A)
(5)
Complete dust box (Microfilter system)
(6)
Sanding pad
(7)
Auxiliary handle (insulated gripping surface)
(8)
Battery release button
A)
(9)
Handle (insulated gripping surface)
(10)
Sanding sheet
A)
(11)
Sanding sheet alignment aid
A)
(12)
Screws for sanding pad
(13)
Sanding pad holder
(14)
Extraction outlet
(15)
Filter element (Microfilter system)
(16)
Vacuum hose
(17)
Screw for auxiliary handle
(18)
Wing nut
(19)
Dust extraction adapter
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Random orbit sander AdvancedOrbit18
Article number
3 603 CD2 0..
Rated voltage V 18
Orbital stroke rate preselec-
tion
No-load speed n
0
rpm 3000 – 12000
No-load orbital stroke rate rpm 6000 – 24000
Orbit diameter mm 3.2
Sanding pad diameter mm 125
Weight according to EPTA-
Procedure 01:2014
kg 1.7 (1.3Ah)–
1.8 (2.5Ah)
A)
Permitted ambient temperature
during charging °C 0 to +45
during operation
B)
and
during storage
°C –20 to +50
Recommended batteries PBA18V…W–.
PBA18V…V–.
Recommended chargers AL18..CV
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed 80dB(A).
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-4:
a
h
= 4.5 m/s
2
, K = 1.5 m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
English | 15
Bosch Power Tools 1 609 92A 4BC | (09.08.2018)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AdvancedOrbit 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedOrbit 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info