Manual Bosch AdvancedHedgeCut 70 (page 10 of 191) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707744

Zoom out

Zoom in

1/191

10 | English

u Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedge trimmer always fit the cutting device cover.

Proper handling of the hedge trimmer will reduce pos-

sible personal injury from the cutter blades.

u Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring or its own cord. Cutter blades contacting a “live”

wire may make exposed metal parts of the power tool

“live” and could give the operator an electric shock.

u Keep cable away from cutting area. During operation

the cable may be hidden in shrubs and can be accident-

ally cut by the blade.

Additional safety warnings

u This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental cap-

abilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their

safety.

Children should be supervised to ensure that they do not

play with the appliance.

u When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

u Always ensure all handles and guards are fitted when

using the machine. Never attempt to use an incomplete

machine or one fitted with an unauthorized modification.

u Always lubricate the cutting blade with protective

spray before use.

u Always wait until the machine has come to a complete

stop before placing it down.

u Other persons and animals should remain at a distance of

3metres or more when the machine is being used. The

operator is responsible for third persons in the working

area.

u Never grasp the blade of the hedgecutter.

u Children or persons unfamiliar with these instructions

must not operate the hedgecutter. Local regulations may

restrict the age of the operator.

u Never cut a hedge while people, especially children or

pets, are nearby.

u The user is responsible for accidents or hazards occurring

to other people or their property.

u Do not operate the hedgecutter when barefoot or wearing

open sandals, always wear substantial footwear and long

trousers. The use of sturdy gloves, non-skid footwear and

safety glasses is recommended. Do not wear loose cloth-

ing or jewellery which can be caught in moving parts.

u Thoroughly inspect the area where the hedge trimmer is

to be used and remove all wires and other foreign objects.

u Prior to operation, check cutter blades, blade bolts and

cutter assembly for wear or damage. Do not operate with

a damaged or excessively worn cutting device.

u Know how to stop the hedge trimmer quickly in an emer-

gency.

u Cut a hedge only in daylight or in good artificial light.

u Never operate the hedgecutter with defective guards or

without the guard in place.

u Always ensure all handles and guards supplied are fitted

when using the hedgecutter. Never attempt to use an in-

complete hedgecutter or one with an unauthorised modi-

fication.

u Never hold the hedgecutter by the guard.

u While operating the hedgecutter always be sure of a safe

and secure operating position at all times, especially

when using steps or a ladder.

u Always be aware of your surroundings and stay alert for

possible hazards that you may not hear whilst operating

the hedgecutter.

u Keep all nuts, bolts and screws tight to ensure that the

hedgecutter is always in a safe working condition.

u The hedgecutter should be stored in a dry, high or locked

up place out of the reach of children.

u Replace worn or damaged parts for safety.

u Do not attempt to repair the machine unless you are quali-

fied to do so.

u Ensure replacement parts fitted are Bosch-approved.

u To safeguard against contact with the moving cutter

blade, this hedge trimmer is constructed with two

handles each with a blade control (switch). To operate

the hedge cutter, both controls must be actuated simul-

taneously. Do not use the tool, if it runs without a

switch being actuated or just one switch being actu-

ated.

Electrical Safety

Warning: Switch off, remove plug from

mains before adjusting, cleaning or if cable

is cut, damaged or entangled.

Your machine is double insulated for safety and requires no

earth connection. The operating voltage is 230V AC, 50Hz

(for non-EU countries 220V, 240V 50 Hz). Contact your

Bosch Service Centre for details. If in doubt contact a quali-

fied electrician or the nearest Bosch Service Centre.

For increased electrical safety use a Residual Current Device

(RCD) with a tripping current of not more than 30mA. Al-

ways check your RCD every time you use it.

Keep the supply cables away from moving hazardous parts

and avoid damage to the cables; this can lead to contact with

live parts.

The connections (plugs and sockets) should be kept dry and

off the ground.

The supply cables must be inspected for signs of damage at

regular intervals and may only be used if in perfect condi-

tion.

If the supply cable on the product is damaged, it must only

be replaced by a Bosch Service Centre. Only use approved

extension cables.

F 016 L81 787 | (16.08.2019) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedHedgeCut 70 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AdvancedHedgeCut 70 Manual

Product: