766843

Bosch AdvancedGrind 18 SystemBox Manual

20
Zoom out
Zoom in
Previous page
1/323
Next page
20 | English
(14) Cutting disca)
(15) Carbide grinding heada)
(16) Quick-clamping nut with bar
(17) Grinding spindle
(18) Hand guarda)
(19) Rubber sanding pada)
(20) Abrasive disca)
(21) Round nuta)
(22) Cup brusha)
(23) Handle (insulated gripping surface)
(24) Extraction guard for cutting with a cutting guidea)
(25) Diamond cutting disca)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder AdvancedGrind 18
Article number 3603CD90..
Rated voltage V= 18
Rated speedA) min-1 11500
Speed adjustment range min-1 2800–11500
Max. grinding disc diameter mm 125
Grinding spindle thread M 14
Max. thread length of grind-
ing spindle mm 21,7
Constant electronic control ●
Speed preselection ●
Soft start ●
Restart protection ●
Overload protection ●
Weight according to EPTA-Procedure01:2014B)
– with low-vibration auxili-
ary handle kg 2.7 (2.5 Ah)–
3.2 (6.0 Ah)
– with standard auxiliary
handle kg 2.4 (2.5 Ah)–
3.0 (6.0 Ah)
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperat-
ure during operationC) and
during storage
°C –20to+50
Recommended rechargeable
batteries PBA 18V...W-.
Recommended chargersD) AL 18...
A) Measured at 20–25°C with rechargeable battery PBA 18V
6.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0°C
D) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-3.
Typically the A-weighted noise level of the power tool are: 86
dB(A); sound power level 97 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN60745-2-3:
Surface grinding (roughing):
ah=10.0m/s2, K=1.5m/s2,
Disc sanding:
ah=4.0m/s2, K=1.5m/s2.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Charging the battery
uUse only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
uDo not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
Follow the instructions on correct disposal.
1 609 92A 6D6 | (25.06.2021) Bosch Power Tools
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AdvancedGrind 18 SystemBox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedGrind 18 SystemBox in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 11,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info