Manual Bosch AdvancedGrassCut 36 (page 17 of 260) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707738

Zoom out

Zoom in

1/260

English | 17

Bosch Power Tools F 016 L81 448 | (1.12.16)

Charging Procedure

The charging procedure starts as soon as the mains plug of

the battery charger is plugged into the socket outlet and the

battery is inserted into the charging compartment.

Due to the intelligent charging method, the charging condi-

tion of the battery is automatically detected and the battery is

charged with the optimum charging current, depending on

battery temperature and voltage.

This gives longer life to the battery and always leaves it fully

charged when kept in the charger for storage.

Rapid-charging Procedure

The rapid-charging procedure is indicated by flashing of the

green charge control LED.

Indication element of the battery: During the charging proce-

dure, the three green LEDs light up one after the other and

briefly go out. The battery is fully charged when the three

green LEDs light up continuously. The three LEDs go out again

approx. 5 minutes after the battery has been fully charged.

Note: The rapid-charging procedure is only possible when the

battery temperature is within the allowable charging temper-

ature range, see section “Technical Data”.

Battery Charged

Continuous lighting of the green charge control LED sig-

nals that the battery is fully charged.

Additionally, a signal tone sounds for approx. 2 seconds,

which acoustically indicates that the battery is fully charged.

Afterwards, the battery can be removed for immediate use.

With no battery inserted, continuous lighting of the green

charge control LED indicates that the mains plug is plugged

into the socket and that the battery charger is ready for oper-

ation.

Battery Temperature below 0 °C or above 45 °C

Continuous lighting of the red LED indicates that the bat-

tery temperature is not within the rapid-charging temperature

range of 0 °C – 45 °C. As soon as the allowable temperature

range is reached, the battery charger automatically switches

to rapid charging.

When the battery is not within the allowable temperature

range, the red battery LED lights up when inserting the bat-

tery into the battery charger.

No charging procedure possible

If a different malfunction of the charging procedure is pre-

sent, this will be indicated through flashing of the red charge

control LED.

The charging procedure cannot be started and the battery

cannot be charged (see section “Troubleshooting”).

Charging Advice

With continuous or several repetitive charging cycles without

interruption, the charger can warm up. This is not meaningful

and does not indicate a technical defect of the battery charg-

er.

A significantly reduced working period after charging indi-

cates that the battery is used and must be replaced.

Observe the notes for disposal.

Battery Cooling (Active Air Cooling)

The fan control integrated in the battery charger controls the

temperature of the inserted battery. When the battery tem-

perature is above 30 °C, a fan cools down the battery to the

optimal charging temperature. The switched-on fan produces

a fan noise.

The battery temperature is within the optimal charging tem-

perature range when the fan is not running. Another reason

for a non working fan might be that it is defective. In this case,

the charging time of the battery might be extended.

AL 3640 CV

Professional

AL 3620 CV

Professional

AL 3640 CV

Professional

AL 3620 CV

Professional

AL 3640 CV

Professional

AL 3620 CV

Professional

AL 3640 CV

Professional

AL 3620 CV

Professional

OBJ_BUCH-1929-002.book Page 17 Thursday, December 1, 2016 3:12 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedGrassCut 36 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AdvancedGrassCut 36 Manual

Product: