Manual Bosch 230(J)B (page 15 of 261) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

119921

Zoom out

Zoom in

1/261

English - 2

The numbering of the machine elements refers to

the representation of the machine on the graph-

ics page.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

1 Thread for auxiliary handle (3x)

2 Spindle lock button

3 On/Off switch

4 Auxiliary handle

5 Grinder spindle

6 Protection guard

7 Adjustment screw

8 Clamping lever

9 Mounting flange with O-ring

10 Grinding/cutting disc*

11 Clamping nut

12 quick-clamping nut*

13 Clamping screw

14 Coded projection

15 Guard, grinding cup*

16 Grinding cup*

17 Two-pin spanner for clamping nut*

18 Hand guard*

19 Spacer discs*

20 Rubber sanding plate*

21 Sanding sheet*

22 Round nut*

23 Cup brush*

24 Diamond cutting disc*

25 Cutting guide with dust extraction

protection guard*

26 Handle unlocking button

27 Handle

28 Cutting grinder stand*

* Not all of the accessories illustrated or described are

included as standard delivery.

Working safely with this machine

is possible only when the operat-

ing and safety information are

read completely and the instruc-

tions contained therein are

strictly followed. In addition, the

general safety notes in the enclosed booklet

must be observed. Before using for the first

time, ask for a practical demonstration.

■ Wear protective glasses and hearing protec-

tion.

■ Wear additional protection equipment for your

safety, such as protective gloves, sturdy

shoes, hard hat and apron.

■ The dust that is produced while working can be

detrimental to health, inflammable or explo-

sive. Suitable safety measures are required.

Examples: Some dusts are regarded as carci-

nogenic. Use suitable dust/chip extraction and

wear a dust respirator.

■ Dust from light alloys can burn or explode. Al-

ways keep the workplace clean, as blends of

materials are particularly dangerous.

■ If the mains cable is damaged or cut through

while working, do not touch the cable but im-

mediately pull the mains plug. Never use the

machine with a damaged cable.

■ Connect machines that are used in the open

via a residual current device (RCD) with an ac-

tuating current of 30 mA maximum. Do not op-

erate the machine in rain or moisture.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

■ Always direct the cable to the rear away from

the machine.

■ Always switch the machine off and wait until it

has come to a standstill before placing it down.

■ For power outage or when the mains plug is

pulled, unlock the On/Off switch immediately

and turn it to the off position. This prevents un-

controlled restarting.

■ The machine must be used only for dry

cutting/grinding.

■ For all work with the machine, the auxiliary

handle must be mounted.

Machine Elements For Your Safety

1 609 929 R35.book Seite 2 Mittwoch, 13. Februar 2008 1:16 13

16 • 1 609 929 R35 • 03.11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch 230(J)B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch 230(J)B Manual

Product: